Building my original block...
#1
Building my original block...
My original block as I have a replacement oem motor in my car. 1998 C2S.
I know the options are endless and will be discussed with builder but I do find there are lots on here with great experience and knowledge. Will go in a car I drive all the time. My 993 is my daily/track day car.
Pretty set on Motec 3.8 VRAM. The question is what Heads? Toss hydraulic lifters? What cams? I know the possibilities are endless if you have the budget. I’ve read through countless threads on here about engine builds as well. Just looking for some guidance to discuss with the builder. Let me add I’ve been tracking for about 10 years but don’t know ****E about building a motor.
I know the options are endless and will be discussed with builder but I do find there are lots on here with great experience and knowledge. Will go in a car I drive all the time. My 993 is my daily/track day car.
Pretty set on Motec 3.8 VRAM. The question is what Heads? Toss hydraulic lifters? What cams? I know the possibilities are endless if you have the budget. I’ve read through countless threads on here about engine builds as well. Just looking for some guidance to discuss with the builder. Let me add I’ve been tracking for about 10 years but don’t know ****E about building a motor.
Last edited by DD GT3 RD; 08-15-2018 at 05:06 PM.
#2
The VERY first question I ask potential clients when we discuss engine projects is, "Whats your budget?".
That answer frames the entire conversation as it determines what it possible to do, or not.
That answer frames the entire conversation as it determines what it possible to do, or not.
#3
Last edited by DD GT3 RD; 08-15-2018 at 08:12 PM.
#4
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: May 2005
Posts: 2,892
Likes: 29
From: Dayton Ohio.....Americas Playground!!!
First step, call Steve Weiner at Rennsport Systems.
Step 2, box it all up and send to Steve Weiner at Rennsport in Oregon.
Step 3, write check
Step 4, Smile nonstop!!
Step 2, box it all up and send to Steve Weiner at Rennsport in Oregon.
Step 3, write check
Step 4, Smile nonstop!!
#5
i was looking with a buddy who knows this stuff much more than I. Think we got to around 25-30k in parts. I have no idea what the labor is for this on top of parts. Wasnt the set # but he was just showing me. Steve I know you guys are also very highly regarded. Are there any general packages priced out?
(Mark, you crack me up,....)
#6
steve that was me yesterday. Thank you so much for your time and knowledge. Again Truly appreciate it.