Subframe Resinstall
#1
Rennlist Member
Thread Starter
Subframe Resinstall
When reinstalling the subframe after new bushings, do I grease or not grease the bolts before they go in and get torqued?
#3
Rennlist Member
I followed the factory service manual recommendation... "Do not grease Dacromet-type nuts and bolts (aluminum color appearance). Observe tightening torques."
I used new bolts that had the greenish tint coating on them.
I used new bolts that had the greenish tint coating on them.
#4
Rennlist Member
Thread Starter