Notices
993 Forum 1995-1998
Sponsored by:
Sponsored by:

Noise from engine area .....

Thread Tools
 
Search this Thread
 
Old 01-23-2002, 01:24 PM
  #1  
Snoops
Advanced
Thread Starter
 
Snoops's Avatar
 
Join Date: Jul 2001
Location: London
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Red face Noise from engine area .....

Hello

I noticed two things that my baby did not use to do.

Firstly when I reverse my car (when it has been standing in the garage overnight) it make sa loud thumping noise as if the front wheels have gone over a rock. Only thumps once and then all is well.

Secondly, when pulling away in first I hear slight noise coming from the engine are as if something is grinding or rubbing. It seems to only happen in first gear.

Any ideas.

TIA

Snoops
Old 01-23-2002, 02:06 PM
  #2  
mags993tt
Instructor
 
mags993tt's Avatar
 
Join Date: Dec 2001
Location: UK
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Post

Originally posted by Snoops:
<STRONG>Hello

I noticed two things that my baby did not use to do.

Firstly when I reverse my car (when it has been standing in the garage overnight) it make sa loud thumping noise as if the front wheels have gone over a rock. Only thumps once and then all is well.

Secondly, when pulling away in first I hear slight noise coming from the engine are as if something is grinding or rubbing. It seems to only happen in first gear.

Any ideas.

TIA

Snoops</STRONG>
Snoops, is it possible that u have a light build up of rust on the discs that causes the pads to 'bind' to the discs and frees itself when you move off. I managed to get this to happen (much to my frustration) by washing the car then putting it into the garage without drying off the brakes even WITHOUT leaving the handbrake on. The subsequent grinding noise may be the pads working off the rust on the discs. It's been pretty damp in London lately...

M
Old 01-23-2002, 02:41 PM
  #3  
Snoops
Advanced
Thread Starter
 
Snoops's Avatar
 
Join Date: Jul 2001
Location: London
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Post

mags993tt

Thanks, The car was washed earlier on in the day and was wet when put in the garage.

Most likely the problem (hopefully)
Old 01-23-2002, 02:43 PM
  #4  
993RS
Race Car
 
993RS's Avatar
 
Join Date: Dec 2001
Location: Switzerland
Posts: 3,547
Likes: 0
Received 7 Likes on 6 Posts
Post

Happens to me too when I wash the car and then park it overnight.
Old 01-23-2002, 03:13 PM
  #5  
mags993tt
Instructor
 
mags993tt's Avatar
 
Join Date: Dec 2001
Location: UK
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Post

Originally posted by 993RS:
<STRONG>Happens to me too when I wash the car and then park it overnight.</STRONG>
I was actually careful not to put the handbrake on and you can imagine my amazement when the pads were so well glued to the discs that I couldn't move off! Tried rocking the car, hitting the brake everything but to no avail so had to just give it a lot of gas and slip the clutch which freed it with a very nasty crunch. Does anyone know of a less painful way to free rusty brakes? ie without leaving half the pad attached to the disc?
Old 01-23-2002, 04:34 PM
  #6  
Ran
Rennlist Member
 
Ran's Avatar
 
Join Date: May 2001
Location: New Jersey, USA
Posts: 418
Likes: 0
Received 0 Likes on 0 Posts
Post

mags993tt--
I dont have a less painful way ONCE it is rusted BUT what I've always done in any car is -- pump brakes many times after car wash.

Snoops--
I thought of replying earlier but figured that the likelihood of your cleaning the car in winter as well as having so much rust was not too high. Guess not In any event, hope there is no real damage. All the best.
Old 01-23-2002, 10:33 PM
  #7  
Flying Finn
King of Cool
Rennlist Member

 
Flying Finn's Avatar
 
Join Date: May 2001
Location: Miami Beach, FL
Posts: 14,218
Likes: 0
Received 8 Likes on 8 Posts
Talking

I always go for a little drive (to dry the car) after I've washed my car, then I park it in the garage. Guaranteed, no problems with the brakes etc.
Old 01-23-2002, 11:09 PM
  #8  
993RS
Race Car
 
993RS's Avatar
 
Join Date: Dec 2001
Location: Switzerland
Posts: 3,547
Likes: 0
Received 7 Likes on 6 Posts
Post

Yes, that is the easiest. I just drive the car around the block after washing it.
Old 01-24-2002, 07:01 AM
  #9  
mags993tt
Instructor
 
mags993tt's Avatar
 
Join Date: Dec 2001
Location: UK
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Post

Thanks all. Looks like there is no getting round having to go for a quick drive on the local damp+salty roads after car washing. Then go through the whole process again
Old 01-24-2002, 08:48 AM
  #10  
993RS
Race Car
 
993RS's Avatar
 
Join Date: Dec 2001
Location: Switzerland
Posts: 3,547
Likes: 0
Received 7 Likes on 6 Posts
Post

Or maybe use your wife's hair blower on the wheels?
Old 01-24-2002, 09:02 AM
  #11  
mags993tt
Instructor
 
mags993tt's Avatar
 
Join Date: Dec 2001
Location: UK
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Post

Originally posted by 993RS:
<STRONG>Or maybe use your wife's hair blower on the wheels? </STRONG>
They tend to start rusting almost immediately so maybe get her to blow dry them while I wash the rest of the car. In fact seeing as she would be there anyway maybe clean the wheels too? Yes, that would go down well, NOT!



Quick Reply: Noise from engine area .....



All times are GMT -3. The time now is 12:09 AM.