FABSPEED || 993 Maxflo Muffler - GROUP BUY IN STOCK!
#31
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Join Date: Mar 2017
Location: Philadelphia, Pennsylvania
Posts: 2,479
Received 687 Likes
on
437 Posts
Unfortunately at this point in time, we do not offer such a header. We are always improving our product line and use our in-house 993's for constant fitment/development testing, so if the demand is there this is something we may be able to offer in the future. I'll chat with R&D and see what their thoughts are!
#32
Drifting
Unfortunately at this point in time, we do not offer such a header. We are always improving our product line and use our in-house 993's for constant fitment/development testing, so if the demand is there this is something we may be able to offer in the future. I'll chat with R&D and see what their thoughts are!
If you did offer such a product, it would be important to back it up with some numbers showing any performance gains and weight savings over stock headers with heat though.
#33
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Join Date: Mar 2017
Location: Philadelphia, Pennsylvania
Posts: 2,479
Received 687 Likes
on
437 Posts
Your x-pipes are quite popular here. In part because they allow folks to mix and match with their preferred mufflers. Having some sport headers with heat would sweeten the package.
If you did offer such a product, it would be important to back it up with some numbers showing any performance gains and weight savings over stock headers with heat though.
If you did offer such a product, it would be important to back it up with some numbers showing any performance gains and weight savings over stock headers with heat though.
#34
Drifting
#37
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Join Date: Mar 2017
Location: Philadelphia, Pennsylvania
Posts: 2,479
Received 687 Likes
on
437 Posts
Alright everyone! I'm bumping this up to LEVEL 3 which is FREE SHIPPING for everyone : )
LEVEL 3 -- 1195 shipped for Maxflo Mufflers OR 1495 shipped for Maxflo Mufflers w/Single Wall Oval Tips
Tips: brushed or polished finish, +$100 for black ceramic coating; specify NB or WB
1. Carlos993 - NB
2. Jarg1
3. uniquenamehere
4.
5.
6.
7.
8.
9.
10.
Please feel free to post with any questions so others can see, or reach out directly for inquiries or orders--all my contact info is in the signature below! Who's next?
LEVEL 3 -- 1195 shipped for Maxflo Mufflers OR 1495 shipped for Maxflo Mufflers w/Single Wall Oval Tips
Tips: brushed or polished finish, +$100 for black ceramic coating; specify NB or WB
1. Carlos993 - NB
2. Jarg1
3. uniquenamehere
4.
5.
6.
7.
8.
9.
10.
Please feel free to post with any questions so others can see, or reach out directly for inquiries or orders--all my contact info is in the signature below! Who's next?
#41
Hey Jason ,
I been wanting to order some stuff from main website . Digging around and checking reviews and such and i came across this http://www.fabspeedsucks.com/ . Made me hold back and question myself .
Are these fake complaints or ? Did Company gone thru a make over ?
Mastermind604
I been wanting to order some stuff from main website . Digging around and checking reviews and such and i came across this http://www.fabspeedsucks.com/ . Made me hold back and question myself .
Are these fake complaints or ? Did Company gone thru a make over ?
Mastermind604
#42
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Join Date: Mar 2017
Location: Philadelphia, Pennsylvania
Posts: 2,479
Received 687 Likes
on
437 Posts
Hey Jason ,
I been wanting to order some stuff from main website . Digging around and checking reviews and such and i came across this http://www.fabspeedsucks.com/ . Made me hold back and question myself .
Are these fake complaints or ? Did Company gone thru a make over ?
Mastermind604
I been wanting to order some stuff from main website . Digging around and checking reviews and such and i came across this http://www.fabspeedsucks.com/ . Made me hold back and question myself .
Are these fake complaints or ? Did Company gone thru a make over ?
Mastermind604
We had a customer last year named Sal Pane who is a convicted felon and proven scam artist. Here's an article from the NYT with one such example and some of his personal history: https://www.nytimes.com/2014/11/02/n...-of-fraud.html. He purchased an exhaust system for his Ferrari and after aggressive track use, an improperly installed O2 Spacer caused a weld on the O2 bung to fail. We offered to fix it for him, but he demanded that instead we would pay him 20 grand (1000s more than he originally paid) with no alternative. We offered to fix the problem and make it right, but he refused, and has since refused our gestures to make the original situation right. He also started this website and we have a pending class action lawsuit against him to stop his libel.
I hope this gives you a better idea of the situation and makes you feel comfortable about our company; this is an isolated incident where a convicted felon with too much money and time on his hands launched an unjust campaign against us.
I would be happy to work with you on whatever system you are considering! I'll shoot over a PM so we can chat directly as well. Cheers!
--- Jason
#43
Jason,
No pics from me, sorry...
but I did re-install the fabspeed xpipe + high flow cats this weekend. Had taken them off before my move to california, to pass the DMV checks. Perfect fit.
GF says it's too loud, her teenage daughter says it sounds like a sports car, so will keep it on until I want some more wrench practice.
And for the previous poster, here's a fabspeed reply that shines some light on the anti website, read the comments for entertainment.
http://www.****************/content.p...named-Sal-Pane
dave
95 911 coupe
03 540i6
No pics from me, sorry...
but I did re-install the fabspeed xpipe + high flow cats this weekend. Had taken them off before my move to california, to pass the DMV checks. Perfect fit.
GF says it's too loud, her teenage daughter says it sounds like a sports car, so will keep it on until I want some more wrench practice.
And for the previous poster, here's a fabspeed reply that shines some light on the anti website, read the comments for entertainment.
http://www.****************/content.p...named-Sal-Pane
dave
95 911 coupe
03 540i6
#44
4th Gear
Join Date: Oct 2017
Location: Perth, Australia
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Hey! Thanks for posting. While it is unfortunate that we have to chat about this at all, this is positive so that other people can see this and have the right information to go on. It's a simple story really.
We had a customer last year named Sal Pane who is a convicted felon and proven scam artist. Here's an article from the NYT with one such example and some of his personal history: https://www.nytimes.com/2014/11/02/n...-of-fraud.html. He purchased an exhaust system for his Ferrari and after aggressive track use, an improperly installed O2 Spacer caused a weld on the O2 bung to fail. We offered to fix it for him, but he demanded that instead we would pay him 20 grand (1000s more than he originally paid) with no alternative. We offered to fix the problem and make it right, but he refused, and has since refused our gestures to make the original situation right. He also started this website and we have a pending class action lawsuit against him to stop his libel.
I hope this gives you a better idea of the situation and makes you feel comfortable about our company; this is an isolated incident where a convicted felon with too much money and time on his hands launched an unjust campaign against us.
I would be happy to work with you on whatever system you are considering! I'll shoot over a PM so we can chat directly as well. Cheers!
--- Jason
We had a customer last year named Sal Pane who is a convicted felon and proven scam artist. Here's an article from the NYT with one such example and some of his personal history: https://www.nytimes.com/2014/11/02/n...-of-fraud.html. He purchased an exhaust system for his Ferrari and after aggressive track use, an improperly installed O2 Spacer caused a weld on the O2 bung to fail. We offered to fix it for him, but he demanded that instead we would pay him 20 grand (1000s more than he originally paid) with no alternative. We offered to fix the problem and make it right, but he refused, and has since refused our gestures to make the original situation right. He also started this website and we have a pending class action lawsuit against him to stop his libel.
I hope this gives you a better idea of the situation and makes you feel comfortable about our company; this is an isolated incident where a convicted felon with too much money and time on his hands launched an unjust campaign against us.
I would be happy to work with you on whatever system you are considering! I'll shoot over a PM so we can chat directly as well. Cheers!
--- Jason
Cheers
#45
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Join Date: Mar 2017
Location: Philadelphia, Pennsylvania
Posts: 2,479
Received 687 Likes
on
437 Posts
Hi Jason, my first post here - by coincidence, I also found that website (which to be fair, had quite a few complainers re: lack of after-sales service) after recently purchasing a TrackTec Valved Bypass Exhaust System which was delivered minus some vital parts. These things can happen, and I was impressed with the quick response from Beverly, but must admit to biting my fingernails after reading some of the posts on said website. As Western Australia is a loooong way from you, I can only hope the disgruntled ones are in the vast minority and we get this resolved asap, as the exhaust is mounted and stuck in the valve-open position, which is way too loud for mine.
Cheers
Cheers