H&R Lowering springs and spacers
#93
Advanced
Spacers + drop on C2 base
I'm running ECS 15mm in the front and currently 5mm in the rear with 21" factory wheels with a bit of camber in the front and rear. Might look different on each car though as I have a C2 with no SPASM. S and 4S cars with SPASM will have different results. With no SPASM, I'd dropped the front 1" and rear 0.6" with KW HAS springs. I'd just ordered 15mm spacers for the rear as I feel the 5mm is too little after the drop. Here are some photos for reference.
The following 4 users liked this post by Harris27:
The following users liked this post:
Harris27 (06-22-2021)
#95
Drifting
I'm running ECS 15mm in the front and currently 5mm in the rear with 21" factory wheels with a bit of camber in the front and rear. Might look different on each car though as I have a C2 with no SPASM. S and 4S cars with SPASM will have different results. With no SPASM, I'd dropped the front 1" and rear 0.6" with KW HAS springs. I'd just ordered 15mm spacers for the rear as I feel the 5mm is too little after the drop. Here are some photos for reference.
The following users liked this post:
M3Inline6 (06-22-2021)
#100
Advanced
I haven't had any vibration issues with the ECS spacers. Perhaps you could try those over the H&Rs
#101
Racer
I have H&R spacers and I don't have any vibration. However, my spacers don't look like the ones you have in that picture.
#103
Racer
#105
Drifting
I haven’t had that experience except with one car, and it was one of my E92 M3’s on BBS LM wheels. Re-mounting the spacers and re-balancing the front wheels cured it. I’ve run spacers for 20 years with no issues, including drag races and track events at Fontana/Autoclub speedway.
The following users liked this post:
BIGWORM (06-22-2021)