When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
@GT3Belts How close is your lizard green strap to the OEM lizard green?
@paxton if we compare our 992 door pull conversion with our lizard green RS, I would say the leather is 99.9%, thread is 99.9%, and strap about 99%. So if you round up, it’s as close to 100% factory as possible 😉HTH
Was this connector a PITA for anyone else? Anyone know how to disconnect? I’m about to feel like an idiot I’m sure. On the install video it shows the connector as a whole being removed with a flathead but they don’t mention unplugging the connector
Was this connector a PITA for anyone else? Anyone know how to disconnect? I’m about to feel like an idiot I’m sure. On the install video it shows the connector as a whole being removed with a flathead but they don’t mention unplugging the connector
Thanks in advance
All of them that don’t have the quick-release function are a pain in the ***.
For others, I stuck a jewelers flat tip screw driver in the connector to release the tab. This was after 5 minutes of banging my head on the roof trying to get it out.
For others, I stuck a jewelers flat tip screw driver in the connector to release the tab. This was after 5 minutes of banging my head on the roof trying to get it out.
@paxton if we compare our 992 door pull conversion with our lizard green RS, I would say the leather is 99.9%, thread is 99.9%, and strap about 99%. So if you round up, it’s as close to 100% factory as possible 😉HTH
For others, I stuck a jewelers flat tip screw driver in the connector to release the tab. This was after 5 minutes of banging my head on the roof trying to get it out.
Yup, or you can use a "pick" type tool like the one that Nick provides from Musicar when you install the front speakers and just "work" the connector out.
03-23-2024, 12:04 AM
