Soul Performance Products - 991.2 Development Thread
#16
Slash cut is it!
#17
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
__________________
SOUL PERFORMANCE PRODUCTS
Quality Exhaust Solutions, Fair Pricing, and Outstanding Service
John Gaydos- Owner, Performance Specialist
Cell - (484) 883-6197
johng@soulpp.com
Jon Wheel - Marketing Manager
jwheel@soulpp.com
SOUL PERFORMANCE PRODUCTS
Quality Exhaust Solutions, Fair Pricing, and Outstanding Service
John Gaydos- Owner, Performance Specialist
Cell - (484) 883-6197
johng@soulpp.com
Jon Wheel - Marketing Manager
jwheel@soulpp.com
#19
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Best,
#21
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Here's another look behind the scenes as we go through the development process. We like to experiment, and we like to craft new components. We removed the carbon fiber shells from a sample set of not-so-attractive sample tips that we had and built a set of custom double wall tips. It's our opinion that this design appears to be too small in the bumper outlets for the 991.2 application, but we can offer them none the less if anyone is interested. We're going to offer these tips by request for our other systems where the size is more fitting.
Stay tuned for more!
Stay tuned for more!
The following users liked this post:
Omega4 (08-28-2019)
#24
#25
Wanted to say I ordered springs from Soul for my 991.2
The only option was Techart which IMO is overpriced considering someone else manufacturers the springs and they just slap their name on them.
The H&R springs are much cheaper. Soul shipped them out right away with a tracking number.
Very pleased with the transaction.
The only option was Techart which IMO is overpriced considering someone else manufacturers the springs and they just slap their name on them.
The H&R springs are much cheaper. Soul shipped them out right away with a tracking number.
Very pleased with the transaction.
#26
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
As you may have seen, Jeff's 4S is back in his possession and we’re glad he’s happy! Prior to pickup we did a final road test and took a few pictures - every car we work on in house we're shooting for a customer car mural.
Jeff's car is now, indeed, a "bad jawn". Out back you'll notice our Single Wall Straight Cut Exhaust Tips.
We stopped at nearby Dinardo Foreign Motors - new school meets old school air cooled.
This Carrera sits a little lower than when it left the factory thanks to H&R Sport Springs - if you’d like to lower your own, give us a call! The ride is still quite comfortable and refined, zero complaints.
Tomorrow, we’ll dive into dyno data!
Jeff's car is now, indeed, a "bad jawn". Out back you'll notice our Single Wall Straight Cut Exhaust Tips.
We stopped at nearby Dinardo Foreign Motors - new school meets old school air cooled.
This Carrera sits a little lower than when it left the factory thanks to H&R Sport Springs - if you’d like to lower your own, give us a call! The ride is still quite comfortable and refined, zero complaints.
Tomorrow, we’ll dive into dyno data!
#27
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
We approached AWE Tuning about testing our development car at their state of the art R&D facility. Since AWE has been engineering precision Porsche performance parts for decades (not to mention the 991.2 Carrera platform) we knew we were in good hands.
The plan was to also incorporate a tune, but Jeff has decided to postpone and enjoy the car with hardware first. We look forward to hopefully getting Jeff tuned in the near future however, and providing further dyno results. Over the course of two days we made runs on several configurations, and here are the results fresh from the AWE Tuning dyno:
First up, Sport Catalytic Converters with HJS HD 200 cell catalytic converters and PSE:
From there we moved on to Cat Bypass Pipes and PSE:
Last, our straight through full 3" Trackback prototype:
We definitely anticipate much greater power gains when our freer flowing exhaust components are paired with a tune. Interested in getting dyno data for us? Let's chat!
Tomorrow we will be officially launching our Sport Catalytic Converters and Cat Bypass Pipes!
The plan was to also incorporate a tune, but Jeff has decided to postpone and enjoy the car with hardware first. We look forward to hopefully getting Jeff tuned in the near future however, and providing further dyno results. Over the course of two days we made runs on several configurations, and here are the results fresh from the AWE Tuning dyno:
First up, Sport Catalytic Converters with HJS HD 200 cell catalytic converters and PSE:
From there we moved on to Cat Bypass Pipes and PSE:
Last, our straight through full 3" Trackback prototype:
We definitely anticipate much greater power gains when our freer flowing exhaust components are paired with a tune. Interested in getting dyno data for us? Let's chat!
Tomorrow we will be officially launching our Sport Catalytic Converters and Cat Bypass Pipes!
Last edited by Soul Performance; 07-28-2017 at 09:05 AM.
#29
And no cells. I've put a few hundred on mine no issues except a lot of smiles per gallon.