When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I found this video better than the one from Suncoast. I also covered my flathead screwdriver with a micro towel so as to avoid any scratches on the paint (I did not have any interior trim plastic tools handy).
The video does not show well how to unclip the connector. Basically, the tab is on the flat side of the connector facing the body of the car. I was sweating trying to remove the first one. Once I learned how much force to use, the second one was a breeze
I found this video better than the one from Suncoast. I also covered my flathead screwdriver with a micro towel so as to avoid any scratches on the paint (I did not have any interior trim plastic tools handy).
The video does not show well how to unclip the connector. Basically, the tab is on the flat side of the connector facing the body of the car. I was sweating trying to remove the first one. Once I learned how much force to use, the second one was a breeze
I would not use a hard edged tool like a screwdriver, whether or not wrapped in microfiber, to remove the lens from the body. There is too much of a risk that you slip and scratch the paint. There is no need to do so. The key is to use pressure and slide it to release the tab on the back. Look at the back of the new unit and you will see what I mean. If you feel you have to use a tool, get the plastic tools used in car stereo shops for removing interior trim pieces.
I would not use a hard edged tool like a screwdriver, whether or not wrapped in microfiber, to remove the lens from the body. There is too much of a risk that you slip and scratch the paint. There is no need to do so. The key is to use pressure and slide it to release the tab on the back. Look at the back of the new unit and you will see what I mean. If you feel you have to use a tool, get the plastic tools used in car stereo shops for removing interior trim pieces.
I agree just push back and in on the rear. If you're having a trouble I'd just go to the dealer rather than risk damage. But it really is pretty easy- maybe a tad more force than you think but they do come out.