991 /S Race Technologies - Brembo Brake pads - Group buy
#1
Banned
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hello guys,
I would like to offer either a special group buy price for Rennlist members on the TS-20 brembo pads for the 991 and 991 S.
To give you guys a little bit more information on the TS-20s here are a very simple write up with pros and cons -
Compound TS20 – Street / Track Pad
Retail Price: $450 Fronts, $330 Rears
*Pros: Good initial bite, very predictable friction levels/stable,
- Great feel for street & track driving.
- Better Heat resistance under dual purpose street/track conditions compared to other pads on the market.
- Comparable performance to most with lower dust, better bite and pad wear rates.
*Cons: Slightly higher disc wear increase over OEM pads.
Small potential for squeal under low temperatures.
Please contact me for group buy prices.
Thank you.
I would like to offer either a special group buy price for Rennlist members on the TS-20 brembo pads for the 991 and 991 S.
To give you guys a little bit more information on the TS-20s here are a very simple write up with pros and cons -
Compound TS20 – Street / Track Pad
Retail Price: $450 Fronts, $330 Rears
*Pros: Good initial bite, very predictable friction levels/stable,
- Great feel for street & track driving.
- Better Heat resistance under dual purpose street/track conditions compared to other pads on the market.
- Comparable performance to most with lower dust, better bite and pad wear rates.
*Cons: Slightly higher disc wear increase over OEM pads.
Small potential for squeal under low temperatures.
Please contact me for group buy prices.
Thank you.
Last edited by Eddie - RPW; 03-24-2014 at 01:03 PM.
#2
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Do I understand these pads work with the stock 991S calipers? If so, I am interested.
I switched from the OEM to the Pagids, which work well but are dusty, although not too noisy if bedded properly, and re-bedded if needed.
I switched from the OEM to the Pagids, which work well but are dusty, although not too noisy if bedded properly, and re-bedded if needed.