Increasing wheel widths on 991.2 Carrera Narrow Body to 9" / 12" - Good or Bad idea?
#16
#17
Rennlist Member
From the Apex website "All 19" and 20" APEX wheels are optimized to clear rear axle steering"
I can post pictures later.
The following users liked this post:
Tier1Terrier (05-14-2024)
#18
Rennlist Member
These aren't the best, but its all I have
The following 4 users liked this post by Tay101:
#19
Rennlist Member
Thread Starter
#20
Rennlist Member
I am running Bilstein Clubsport coilovers which come with camber plates. I also have GT3 lower control arms.
You would need at least one or the other to increase camber and correct caster in order to run this setup.
#21
Rennlist Member
Not so wild guess, but suspect this car punches WELL above its weight to the frustration of more than a few GT drivers.
Love these performance 3.0 builds. Wheel/tire package looks great. Very impressive, too, given what Preuninger told me they had to do in order to tuck 325s into the RS.
Love these performance 3.0 builds. Wheel/tire package looks great. Very impressive, too, given what Preuninger told me they had to do in order to tuck 325s into the RS.
The following users liked this post:
Tier1Terrier (05-15-2024)
#22
Rennlist Member
Not so wild guess, but suspect this car punches WELL above its weight to the frustration of more than a few GT drivers.
Love these performance 3.0 builds. Wheel/tire package looks great. Very impressive, too, given what Preuninger told me they had to do in order to tuck 325s into the RS.
Love these performance 3.0 builds. Wheel/tire package looks great. Very impressive, too, given what Preuninger told me they had to do in order to tuck 325s into the RS.
The car has a Cobb tune as well. It certainly is a blast to drive on the track.
#23
This right here, 20x12 narrow-body. Dare to be different
Last edited by 911CSC; 05-17-2024 at 10:04 PM.