Motec powered 991.2 Turbo S
#1
Motec powered 991.2 Turbo S
Hey all,
Thought to share some good news for the .2 guys. We finally get a PnP Motec system like the .1 Turbos.
A few days ago we finished my car here in Dubai on the motec and wow was I impressed.
Car drives very close to stock, super smooth shifting, no jerkiness and really good idle. Oil pressure remains same as OEM ECU! The only downside ive noticed is the engine oil level sensor doesnt really work anymore.
Here are the results so far including a Dyno run at 32Psi with E70 fuel and 24Deg timing.
Below draggy is also essentially the same Map.
This is on stock heads and a 3.8 engine. Xona 6164 turbos, ByD intake manifold, boostlogic titanium exhaust. All the tuning and build was completed here by Faisal at Xperformance.
Thought to share some good news for the .2 guys. We finally get a PnP Motec system like the .1 Turbos.
A few days ago we finished my car here in Dubai on the motec and wow was I impressed.
Car drives very close to stock, super smooth shifting, no jerkiness and really good idle. Oil pressure remains same as OEM ECU! The only downside ive noticed is the engine oil level sensor doesnt really work anymore.
Here are the results so far including a Dyno run at 32Psi with E70 fuel and 24Deg timing.
Below draggy is also essentially the same Map.
This is on stock heads and a 3.8 engine. Xona 6164 turbos, ByD intake manifold, boostlogic titanium exhaust. All the tuning and build was completed here by Faisal at Xperformance.
The following 2 users liked this post by DubaiPorsche:
IRunalot (12-04-2023),
thesaintusa (12-04-2023)