Install question regarding middle clear light on 911.1 Targa 4S
#1
Install question regarding middle clear light on 911.1 Targa 4S
I originally placed dark tint on my 2016 Targa 4S on the rear lights. It didn't look right (too ghetto) so I bought the clear light kit from Suncoast. I found plenty of videos/posts regarding the install of the main right and left lights but nothing on the middle piece. The install on right/left lights was easy (took maybe 10 min), but I'm not sure where to start on the middle light. Suncoast calls it the middle C4 reflector, but I noticed that my current/original piece does have a working light in it. Suncoast appears to have updated the site (purchased it months ago) and now says that it recommends professional installation. Not sure what to do...
#5
super easy, just a bunch of torx screws (on top, wheel wheel and under bumper) and it pops right off. once it comes out, unplug license plate light, camera, and pdc if your car has parking sensors. if you havent changed your air filters in a while, might as well do it while the bumpers off.
#6
I finally got around to this, it wasn't easy! Had to remove 12 screws, remove right/left taillights, disconnected wires to the lights/camera, and then put it all back together. I have a few other mods to make but the booty is done!
\
"blacked out" tinted rear lights, wrapped rear engine grille
Got to start somewhere...
It's off!
Done!
\
"blacked out" tinted rear lights, wrapped rear engine grille
Got to start somewhere...
It's off!
Done!