991.1 GTS Radiator Grilles by RGS are here! Finally!
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
991.1 GTS Radiator Grilles by RGS are here! Finally!
Some Rennlisters have reached out to us to develop an easy to install, OEM-looking grille set for the 991.1 GTS Porsche 911. Our philosophy is to create an easy to install solution, no bumper removal or permanent modifications and an OEM-look. We believe we hit it out of the park with this one! Typically a multiple piece install, these install as one piece, in less than 30 minutes with basic hand tools. Check them out at www.RadiatorGrilleStore.com or directly here https://www.radiatorgrillestore.com/...diator-grilles
Here is the video of the install procedure (we have tightened the gap noticed in the video)
Thank you to @uphoto for the install video!
Porsche 911 991.1 GTS front radiator grille set by Radiator Grille Store https://www.radiatorgrillestore.com/...diator-grilles
Here is the video of the install procedure (we have tightened the gap noticed in the video)
Porsche 911 991.1 GTS front radiator grille set by Radiator Grille Store https://www.radiatorgrillestore.com/...diator-grilles
__________________
The following 2 users liked this post by RGS:
Jerrygreene (12-28-2022),
uphoto (04-11-2021)
#2
These are great! Look at it as insurance against MUCH bigger issues that can happen.
The following users liked this post:
RGS (04-12-2021)
#3
Rennlist Member
i have the RGS grilles on my car too and theyre awesome quality, fitment, and price! does exactly what it's intended to do while looking good. paying like $300+ for mesh grilles is just ridiculous to me.
#4
For those of us who have a center opening (non-GTS), will a grill be made so it's further into the bumper? I'm not digging it sitting "flush" currently and would like the more hidden behind the scenes look.
The following users liked this post:
AdamSanta85 (05-28-2021)
#5
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
We are thinking along the same lines. All the GTS in our area seem to be manuals, at least the ones in our community. We will be on the look out!
The following users liked this post:
uphoto (04-12-2021)
#7
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Trending Topics
#9
Nordschleife Master
@RGS - have you guys given thoughts to develop grills that mount OUTSIDE and in FRONT the slates, so as to cover them up and create GT3 look? Never really liked the look of those slates. Is it doable?
The following users liked this post:
dd356 (05-28-2021)
#10
This was an instabuy for me. Will post pics and reviews here after I install them.
The following users liked this post:
uphoto (04-17-2021)
#11
#12
I'm confused about the manual vs PDK thing--I thought the center radiator was standard on all 3.8 engines with the powerkit? Both manual and PDK GTS 991.1 cars should have a center radiator (and 50th). If it's just the sport kit package added to a non-GTS then it would have a filler piece instead of the radiator.
I'd be interested in this but I definitely have a radiator in the center of mine which I'd love to keep from getting further dinged up.
I'd be interested in this but I definitely have a radiator in the center of mine which I'd love to keep from getting further dinged up.
#14
Rennlist Member
Just installed mine today....
Came with detailed instructions..got a little confused on removing the covers over the two (2) on each side horizontal slats. Just futz around a bit and you'll figure it out...reading the instructions really helped! The price? $75.00!!! Awesome, and it's a DIY. And before you put the covers on, don't forget to clean out all the crud that has most likely accumulated in the radiator cavity. With the RGS grills in, no more debris!