Spacers with Carerra S wheels and 305 pilot sport 4s tires
08-10-2019, 10:05 PM
#31
991.1 and 991.2 are a bit different so it will depend on what model you have. I've had better luck on previous 911's with aftermarket wheels. HRE's were the best I found.
I'm running OEM Carrera S 20" on my 991.2 with nothing in back an 5mm up front. It's still not quite right. I might try 7mm front and move the 5mm to the rears.
This is what I want: my old 997 with HRE's. They were perfect for me with no spacers.
08-10-2019, 11:03 PM
#32
Rennlist Member
Join Date: Jul 2001
Location: Marineland FL
Posts: 12,535
Likes: 0
Received 3,460 Likes
on
2,361 Posts
08-11-2019, 08:40 AM
#33
08-11-2019, 09:52 AM
#34
Rennlist Member
Join Date: Jul 2001
Location: Marineland FL
Posts: 12,535
Likes: 0
Received 3,460 Likes
on
2,361 Posts
No, just my hood, front fenders, A pillar, mirrors, and sides about 18" up. My installer removed the factory protection just forward of the rear wheels and replaced it, which has film higher up there and some behind the rear wheels as well. I only have 7mm spacers though and zero chips/marks in the film, or elsewhere.
08-11-2019, 06:42 PM
#38
The following users liked this post:
cryptical1200 (08-11-2019)
The following users liked this post:
BGLeduc (08-11-2019)
08-11-2019, 08:31 PM
#40
Rennlist Member
Join Date: Jul 2001
Location: Marineland FL
Posts: 12,535
Likes: 0
Received 3,460 Likes
on
2,361 Posts
Clear side markers would look sweeeeet.
08-11-2019, 10:20 PM
#42
Rennlist Member
Join Date: Jul 2001
Location: Marineland FL
Posts: 12,535
Likes: 0
Received 3,460 Likes
on
2,361 Posts
I had a 1987 Guards Red 930 Sunroof Coupe, which was my first P-car so I know what you mean; however, the orange side markers were taken off my car even before I took delivery of my current Targa GTS!