IMPORTANT INFO REGARDING CENTRELOCKS & SAFETY
#16
I was told all sorts of horror stories that the wrench was $9,000. And the grease was $2,000. Utter rubbish. Watched them take them off and on. Piece of cake. Nothing special at all.
#17
Rennlist Member
TANSTAAFL.
Last edited by StormRune; 09-21-2018 at 09:05 AM.
#18
Race Director
I had Center Locks on my 2012 GTS.....never again! I had proper documentation on them, all the right tools. They are a major hassle and expense.
My 2017 GTS is 5 bolts....so so much better!
Center Locks really really are a pain...totally suck.
My 2017 GTS is 5 bolts....so so much better!
Center Locks really really are a pain...totally suck.
#19
#20
Power kit is $12k
sport Chrono is 2k
sport exhausts 3k
sport design front is 3k
tinted tails is 600
sport design mirrors is 600
spasm is 800
(above in USD)
I am aware there are also “packages” but however you slice it the GTS is the cheaper option...
CL wheels are ~$4500 CAD a piece up here in Canada.
#21
Rennlist Member
Actually if you price it out the GTS is CHEAPER than an S equipped with the same options BEFORE even considering CL wheels.......
Power kit is $12k
sport Chrono is 2k
sport exhausts 3k
sport design front is 3k
tinted tails is 600
sport design mirrors is 600
spasm is 800
(above in USD)
I am aware there are also “packages” but however you slice it the GTS is the cheaper option...
CL wheels are ~$4500 CAD a piece up here in Canada.
All I said that the cost of the centerlocks contribute to the cost of the GTS package and you respond with a long explanation of why the GTS package is a cost-effective package. I wasn't even arguing that. (And you forgot to mention that it is a truly special package since it offers the 2WD wide-body option you can't get on an non-GT car).
But the centerlocks, minus the cost of the 5 lug wheels they replace, will certainly contribute to the overall package cost. They aren't "free" unless you choosing to declare that out of that long list of items they are the free thing. They do look great though!
I don't even know why I cluttered OP's thread with these hijacked responses anyway. Sorry OP. Very nice of you to post that doc!
Last edited by StormRune; 09-21-2018 at 04:56 PM.
#22
Rennlist Member
My TTS has PCCB and 5 lug. As much as I like the look of CL's I am so happy when I want to remove and clean my wheels all I need is my trusty torque wrench to make sure all is good.
#23
Race Director
#24
I have changed mine at least ten times back and forth this year now, and I can do it almost as quickly as 5 bolt now. The biggest time consumer is loosening and retorquing the wheel. I love not having to re-torque the wheels all the time at the track. Just one less thing to worry about.
** I used to have difficulty getting the lock to engage fully at the end, but I found using a 1/2 ratchet extension and hand twisting a little bit (to create friction) and pulling back engages the lock fully. The first few times I had a hell of a time getting the locks out - and thus I hated CL's for the first few times.
** I used to have difficulty getting the lock to engage fully at the end, but I found using a 1/2 ratchet extension and hand twisting a little bit (to create friction) and pulling back engages the lock fully. The first few times I had a hell of a time getting the locks out - and thus I hated CL's for the first few times.
#25
Rennlist Member
I have changed mine at least ten times back and forth this year now, and I can do it almost as quickly as 5 bolt now. The biggest time consumer is loosening and retorquing the wheel. I love not having to re-torque the wheels all the time at the track. Just one less thing to worry about.
** I used to have difficulty getting the lock to engage fully at the end, but I found using a 1/2 ratchet extension and hand twisting a little bit (to create friction) and pulling back engages the lock fully. The first few times I had a hell of a time getting the locks out - and thus I hated CL's for the first few times.
** I used to have difficulty getting the lock to engage fully at the end, but I found using a 1/2 ratchet extension and hand twisting a little bit (to create friction) and pulling back engages the lock fully. The first few times I had a hell of a time getting the locks out - and thus I hated CL's for the first few times.
I've taken all four off and put them back on at least three times now with no issues.
The CL wheels are the thing people compliment most about the car. And I agree with them! Random strangers walk up to the car complimenting the wheels.
Getting the tires changed could be a PITA, but my thought is to take the wheels to the tire shop off the car. I've always done that with my motorcycle in any event.
#27
Rocky Mountain High
Rennlist Member
Rennlist Member
I can see how centerlock wheels could be problematic if you were driving far from home or in a very rural area and got a flat tire. Other than that, I find them to be easier than 5-lugs. I change my wheels in my garage every fall and every spring. It’s easy. My independent mechanic has no problem dealing with centerlocks. Discount tire by my house handles centerlocks with no problem. I started a thread in the Turbo forum when I changed to my winter wheels for the first time. I had heard all the horror stories, and I was shocked at how easy it was.
#28
I can see how centerlock wheels could be problematic if you were driving far from home or in a very rural area and got a flat tire. Other than that, I find them to be easier than 5-lugs. I change my wheels in my garage every fall and every spring. It’s easy. My independent mechanic has no problem dealing with centerlocks. Discount tire by my house handles centerlocks with no problem. I started a thread in the Turbo forum when I changed to my winter wheels for the first time. I had heard all the horror stories, and I was shocked at how easy it was.
#29
Rocky Mountain High
Rennlist Member
Rennlist Member
I know that my independent Porsche mechanic/tuner sends all their cars to this Discount Tire location. They sell quite a few wheels. Maybe this was the reason that this Discount Tire decided to get the tools for centerlocks. The thing that worries me the most about wheel changes is the potential for damage to the PCCB rotors. I want a shop that understands the cost and understands how to deal with them.
#30
Nordschleife Master