Badging on GTS
03-14-2018, 09:50 PM
#1
Instructor
Thread Starter
Badging on GTS
Have a new GTS coming with standard badging on the rear bumper “911 Carrera GTS”. Feeling this is too “verbose” and thinking about changing it to “911 GTS” or just “GTS”. Have seen others on RL with GTS, do most leave it stock?
03-14-2018, 10:00 PM
#2
DMoore
'18 911 GTS (presently at sea in the North Atlantic)
03-14-2018, 10:10 PM
#3
If it is not built yet, ask Porsche to badge it according to Your taste. That is better than doing alterations Your self.
03-14-2018, 10:14 PM
#4
Rennlist Member
Join Date: Jan 2016
Location: New Orleans, LA (NOLA)
Posts: 5,262
Received 2,280 Likes
on
1,045 Posts
I prefer the cleaner uncluttered look. I did the model delete on both of my ordered Porsches. If you do it after the fact, you need to recenter "Porsche" on the bumper.
03-14-2018, 10:34 PM
#7
Instructor
Thread Starter
Thanks - car is built with “911 Carrera GTS” coming with PORSCHE above. I noticed if you did model delete, the PORSCHE lettering is in a larger “font”and lower on the bumper. Asked the clear if I could get 911GTS when I ordered the car, but they said no. I’ll need to make any changes when the car arrives in the US.
Trending Topics
03-14-2018, 10:45 PM
#9
Rennlist Member
[img]webkit-fake-url://3e101d5e-d532-4b2a-9708-0ebed6ccf1a2/imagejpeg[/img]
03-14-2018, 10:56 PM
#11
AutoX
Join Date: Nov 2015
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
If you do the model delete, the logo size is the same, but it is lowered on the deck lid.
I ordered my car with the model delete, so when I wanted to put the GTS badge on, so I had to get another Porsche badge and then apply the GTS badge below it.
Your dealership may have a template you can use to get the spacing right. Or you can also mark the spacing with painters tape.
I ordered my car with the model delete, so when I wanted to put the GTS badge on, so I had to get another Porsche badge and then apply the GTS badge below it.
Your dealership may have a template you can use to get the spacing right. Or you can also mark the spacing with painters tape.
03-14-2018, 10:58 PM
#12
Anytime I run a build sheet and the lettering on the back of the car doesn't match how it came from the factory, I always wonder if the car was in an accident or repainted. Personally I don't care for the alphabet soup on the back but I'd leave it the way it was born.
