!Before & After Thread!
#3
Instructor
This is Before
and this is after... See the differences?
that's asking for a lot...but I'll play.
Unfortunately, I don't have a button to manage attachments...
ahh, NM I got it, but I was hoping to reduce size of image..can it be done with Rennlist software?
The following users liked this post:
Clubber (12-22-2023)
#6
Intermediate
Hi,
im a newbie to the Cayenne, just getting my 2016 Cayenne S 3 weeks ago, and receiving a new Launch x431 v (8”) this week. On my first foray to see the x431 works, I noted that the VCI (OBD interface) is VERY loose when plugged into the car’s port. It wiggles and virtually falls out under its own weight. If you wiggle it a bit to make sure it’s straight, it will connect, but just as likely to disconnect. So it’s like it’s not in all the way. There’s a slight improvement using the extension cord provided by launch, but that’s only because this allows you to lay the VCI on the floor to keep it in one position. Has anyone else had this issue with the Launch interface? It’s almost like it should go in further, but something is blocking it, or perhaps some sort of clip that is supposed to hold it in? I sure hope my OBD port wasn’t previously damaged. It looks okay though I need to get way down there, looking up with good light and magnifying loupe to inspect it more closely.
PS This is a great thread even if very long to search. (Perhaps it justifies its own 958 Coding sub forum). I am looking forward to using it extensively once I need it. (My first adjustment will be unhiding the mirror fold function. )
Gary
Shawnigan Lake, BC
im a newbie to the Cayenne, just getting my 2016 Cayenne S 3 weeks ago, and receiving a new Launch x431 v (8”) this week. On my first foray to see the x431 works, I noted that the VCI (OBD interface) is VERY loose when plugged into the car’s port. It wiggles and virtually falls out under its own weight. If you wiggle it a bit to make sure it’s straight, it will connect, but just as likely to disconnect. So it’s like it’s not in all the way. There’s a slight improvement using the extension cord provided by launch, but that’s only because this allows you to lay the VCI on the floor to keep it in one position. Has anyone else had this issue with the Launch interface? It’s almost like it should go in further, but something is blocking it, or perhaps some sort of clip that is supposed to hold it in? I sure hope my OBD port wasn’t previously damaged. It looks okay though I need to get way down there, looking up with good light and magnifying loupe to inspect it more closely.
PS This is a great thread even if very long to search. (Perhaps it justifies its own 958 Coding sub forum). I am looking forward to using it extensively once I need it. (My first adjustment will be unhiding the mirror fold function. )
Gary
Shawnigan Lake, BC
#7
Holy mother of all wrong area/bump. Don't know how else to explain it.
Trending Topics
#8
Intermediate
Yikes, sorry about that. Second time but this time I figured it out. I was in the 958 forum, honest. But on an iPad, when you are in a post, the next post shows at the bottom of the page, even if in a completely different subforum. Hitting Quick Reply at the bottom therefore responds to the wrong post. I’ve participated in many forums, never seen this before, but have now learned that rennlist has this issue.
The following users liked this post:
uphoto (03-05-2021)