Bilstein Coilover Install on Turbo S Stuck!!
#16
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
I was explaining to Matt at the shop also though… Porsche tends to overcomplicate things ha ha. I deal with so many shops that work on other models and they always tell us the same. I think he’s got it covered.
__________________
Proud TOP Porsche Distributor For:
Kline-Innovation - ams Performance - TiALSPORT/XONA - #1 COBB PRO TUNER - CSF - IPD Plenums - DO88 - dodsonmotorsport
310-600-1850 - sam@bydesignauto.com
Proud TOP Porsche Distributor For:
Kline-Innovation - ams Performance - TiALSPORT/XONA - #1 COBB PRO TUNER - CSF - IPD Plenums - DO88 - dodsonmotorsport
310-600-1850 - sam@bydesignauto.com
#17
Intermediate
Thread Starter
Yeah the dealership was utterly confused why I would change anything on that car, they weren't even familiar with the term "Coilover"...they were like what is this your putting on this car...and why??
#18
Rennlist Member
Yeah the instructions for the PDCC install suggests using all four collars on this kit...I mean each collar is fairly think which affects the stack height, you would have to take them back out to take the extra two collars off. Thank goodness I found this thread.
Bilstein B16 Damptronic height issue - Page 2 - Rennlist - Porsche Discussion Forums
Bilstein B16 Damptronic height issue - Page 2 - Rennlist - Porsche Discussion Forums
"Note: Cars that are equipped with PDCC (Active Stabilizer Control) must also purchase the Sway Bar Adapter kit."
#20
Intermediate
Thread Starter
I bought the kit locally from another Porsche enthusiast, he had it on his car for like 1k miles and sold the car, took it off. It is like new, but I needed to buy a PDCC add on, if you have a Turbo S you have PDCC. He sold it to me VERY reasonably, let's just say about a 1/3 of what it cost new.
#21
Rennlist Member
I bought the kit locally from another Porsche enthusiast, he had it on his car for like 1k miles and sold the car, took it off. It is like new, but I needed to buy a PDCC add on, if you have a Turbo S you have PDCC. He sold it to me VERY reasonably, let's just say about a 1/3 of what it cost new.
A
#22
Rennlist Member
I may loose my **** on this soon. Made the big jump to purchase the B16's and the PDCC add-on. Multiple sites show B1 11-223900 as the required add-on, but that is incorrect. The right sway bar is B1 11-239680 which is for the Bilstein clubsport coilover and it limits the lowering capability.
Can someone who has the B16 coilovers on a car with PDCC advise on the right height, or better share a pic, please.
Can someone who has the B16 coilovers on a car with PDCC advise on the right height, or better share a pic, please.
Last edited by D1al911; 05-31-2024 at 04:25 PM.
#23
Intermediate
Thread Starter
I got mine in and the ride height is absolutely perfect with the PDCC on the car. It ride amazing as well, I absolutely think it transformed the car. Also my car was porpoising a lot when driving it before the change, it turned out the front dampers were completely shot on the car at 50k miles. With the PDCC on and and two adjusting collars the ride height is perfect.
#24
Rennlist Member
I am returning the entire kit. Ordered the stock OEM struts to stay with my lowered stance :/ (I am 3/4 inch lower than the lowest setting on B16+PDCC which sits at 27' up front). I never had issues with ride, was upgrading only because the strut was shot. Will be a few more days of downtime until I get the new parts.
#25
Rennlist Member
FCP and Flat 6 had the lowest price, and FCP is now backordered, the set I have from Flat 6 (which I will ship back on Monday) is the last they had. If anyone is looking for one, FYI.