When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
We just tested and verified this feature and it's lightning quick! Same procedure as the factory PWIS dyno mode setting. In fact, if the car was in dyno mode initiated by the PWIS, it can toggle with the AP and vise versa. For those who want to get creative at the drag strip, it happens in 1 second so you can even initiate, do a burn-out and in 1 second, switch back and you are off! This feature will likely come for both 991.1 and 991.2 models in about 3-4 weeks as an update. it will make things much easier for shops that do not have an AWD dyno and don't have a PWIS. Even if you do it just so much easier we love it.
ummmm, another Noobie question, arent AWD cars an advantage in drag racing? that's where we can launch and gap most RWD vehicles from the line.
why would we want just RWD for drag racing?
ummmm, another Noobie question, arent AWD cars an advantage in drag racing? that's where we can launch and gap most RWD vehicles from the line.
why would we want just RWD for drag racing?
It gives you the option to do a real wheel burnout to heat up the res tires for more traction. Most FBO cars could use that and go back to AWD to race. Plus it lets you dyno on a RWD dyno.
Now the serious 8 second hitters running hard core rear tires, might just use RWD only for launch and race since they are more purpose built and FWD cn become a problem with torque steer, etc.
It gives you the option to do a real wheel burnout to heat up the res tires for more traction. Most FBO cars could use that and go back to AWD to race. Plus it lets you dyno on a RWD dyno.
Now the serious 8 second hitters running hard core rear tires, might just use RWD only for launch and race since they are more purpose built and FWD cn become a problem with torque steer, etc.
ummmm, another Noobie question, arent AWD cars an advantage in drag racing? that's where we can launch and gap most RWD vehicles from the line.
why would we want just RWD for drag racing?
makes it easier to clean off and heat up the rear tires as well. They don’t really get good heat in them during awd burnouts .
05-20-2021 | 10:41 PM
