Advan GT wheels
#1
Instructor
Thread Starter
Advan GT wheels
What do you think?
#3
Instructor
Thread Starter
#4
I have a GT Silver TTS - to my eye, darker wheels look better. I bought the car with HREs in a satin finish - they looked too close to the color of the car, very little contrast, but enough off they almost clashed. They are now finished in dark clear (center) and super dark clear (rim), if anything I'd like them a bit darker.
#5
Instructor
Thread Starter
I have a GT Silver TTS - to my eye, darker wheels look better. I bought the car with HREs in a satin finish - they looked too close to the color of the car, very little contrast, but enough off they almost clashed. They are now finished in dark clear (center) and super dark clear (rim), if anything I'd like them a bit darker.
#6
Great wheels. Not the fanciest, but they're constructed the right way and they're light. They are drop forged meaning a die compresses the metal into it's shape. This gives the wheel the proper grain structure. Rather than a forged billet that is machined into shape. Be sure you get the right offsets. Contrary to what some manufacturers advertise, GT3 and Turbo are NOT the same offset
#7
Instructor
Thread Starter
Great wheels. Not the fanciest, but they're constructed the right way and they're light. They are drop forged meaning a die compresses the metal into it's shape. This gives the wheel the proper grain structure. Rather than a forged billet that is machined into shape. Be sure you get the right offsets. Contrary to what some manufacturers advertise, GT3 and Turbo are NOT the same offset
I know I can get +55R, 20"x12", but just casually looking around I only see a +42F 20"x9" for the front..
I'll have to get with Sam to figure it out.
Trending Topics
#8
I have a set on order. I should be getting them in a couple of months. My car is white thought, and I got them in black.
Forged, light, and I love the looks!!!
for your silver I do see the brushed aluminum look as a good match.
Forged, light, and I love the looks!!!
for your silver I do see the brushed aluminum look as a good match.
#9
Instructor
Thread Starter
Post pics!
#11
Race Director
There’s a nice set of Advan for sale in the Market
Place forum
Place forum
#12
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
I love these wheels - I'm looking to get a set for my new TurboS project car..
I'd really like to get them in stain finish, but I don't think they make satin finish in center lock for TurboS / GT3RS? (if they can't do that I'll end up going gold)
what do you guys think would be the bet choice considering the color of the car and the break calipers.
I'd really like to get them in stain finish, but I don't think they make satin finish in center lock for TurboS / GT3RS? (if they can't do that I'll end up going gold)
what do you guys think would be the bet choice considering the color of the car and the break calipers.
__________________
http://www.CSFrace.com/
http://www.CSFrace.com/
#13
Instructor
Thread Starter
I think the top gray wheel will blend into the color of your car and not look good.
The gold would be wild.
Black would probably be better. There is a set for sale in the market place.
https://rennlist.com/forums/market/1119498
The gold would be wild.
Black would probably be better. There is a set for sale in the market place.
https://rennlist.com/forums/market/1119498