When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I did passenger seat first because I was over there finishing up hardwiring my radar detector to the D2 slot in the passenger footwell fuse box.
I completed my hardwire but broke the pins holding the fusebox panel in place. Were you able to remove that panel without breaking any of the pins? It seem so poorly designed that they easily break. My replacement panel broke a pin reinstalling it!
I completed my hardwire but broke the pins holding the fusebox panel in place. Were you able to remove that panel without breaking any of the pins? It seem so poorly designed that they easily break. My replacement panel broke a pin reinstalling it!
Hi Guys
Sorry I just saw this I was out all day...
I sent the install instructions with the tracking info when I shipped these ...
I will send them again, but please email me, so I send it to the correct email address ... Honestly it’s very simple ed@pencom.com
best regards
Ed
I have the same question regrading the long velcro piece. Mine did not come with instructions. How about posting them here? Also, any advice for lining up the stitching for both pieces? From the pics posted it seems like others are having the same challenge. Thank you and they look great otherwise.
I have the same question regrading the long velcro piece. Mine did not come with instructions. How about posting them here? Also, any advice for lining up the stitching for both pieces? From the pics posted it seems like others are having the same challenge. Thank you and they look great otherwise.
Just send Ed an email or PM and he'll forward you a set of instructions. That's what I did before I bought mine.
Haha I didn’t want to call anyone out but some of these installs look *rough*. Take your time and pull everything TIGHT.
For stitching that falls to the outside of the seat go under the seat cushion and position the Velcro further inboard. And pull all that stuff down TIGHT. Let me inspire you:
Originally Posted by 360MVA
I have the same question regrading the long velcro piece. Mine did not come with instructions. How about posting them here? Also, any advice for lining up the stitching for both pieces? From the pics posted it seems like others are having the same challenge. Thank you and they look great otherwise.
I have a brand new set of these for sale with platinum grey stitching, if interested. Unfortunately I won't be using them. Ed did an amazing job, as everyone has said:
We should keep bumping this thread - it was too hard to find for me yesterday
+1 for Ed - great guy, great product. These 991/981 buckets are so nice and so expensive to replace, these bolster protectors are great in keeping the vulnerable seat leather looking like new as the cars are in use.
Nice looking but I have a few questions. Some of the installs look pretty good but some show creasing, so is the installation a bit challenging? Some people are having problems reinserting the seat switch, is that a fairly common issue?
Nice looking but I have a few questions. Some of the installs look pretty good but some show creasing, so is the installation a bit challenging? Some people are having problems reinserting the seat switch, is that a fairly common issue?
I think if you go back a few pages, you will see that putting on these covers is really not a big challenge On a scale of 1-10 I would give it a 5
I am not sure what you mean by creasing ? ...
If a number of those who posted issues with installing had read the email I sent ( With the instructions ) I think it would have been a breeze to install these Maybe some who posted earlier can chime in .... But if you go thorough this thread, I think you we have the answers to your questions?
If you have any other questions please feel free to email me ed@pencom.com
Best regards
Ed