40whp and 30wtq gains with Dundon Motorsports Headers, no flash required!
#32
Dropped my stock 2015 991GT3 to Charles this morning for him to work on his latest exhaust fitment. Picked my car up this am from Cantrell's for alignment check and to put on PSC2 and take off MPSS I had on this winter. Our wettest so far.
#36
#37
#39
My setup will not be modular with the factory side mufflers. I build my setups complete for maximum power and without those compromises the OEM exhaust incorporates. I could build something that could utilize the OEM side mufflers but they would compromise a lot of the performance.
#40
I asked that not because I wanted to use oem side mufflers but to know if it would be possible to use the cargraphic valved pipes that I already have on the car.
It could be interesting for some people who already have some side muffler delete pipes or other valved pipes as they could just buy your headers catted or not and could if needed fit back the oem side mufflers for resell or track noise limits or other reasons.
I see that the side muffler valved pipes you sell with your set up look quiet similar in design as other brands but don t know if the restriction in power would be that much different because of the curve of the pipe at that point or not at all.
It could be interesting for some people who already have some side muffler delete pipes or other valved pipes as they could just buy your headers catted or not and could if needed fit back the oem side mufflers for resell or track noise limits or other reasons.
I see that the side muffler valved pipes you sell with your set up look quiet similar in design as other brands but don t know if the restriction in power would be that much different because of the curve of the pipe at that point or not at all.
#41
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Jan 2016
Posts: 1,956
Likes: 371
From: Gig Harbor, Wa
Where the Dundon valved side pipes join with the Dundon Headers is a different location than the factory side mufflers. So because of that parts that were designed for factory exhaust joining positions won't work with our headers.
As Charles said, all of it is designed to maximize power, the cargraphic and a few other valved side deletes are pretty good pieces, but were designed for the stock exhaust setup. I'm sure the cargraphic parts flow fine, but they just won't fit.
I'm sure there are others that would love a nice set of Cargraphic side pipes, if you're interested in picking up 40whp!
As Charles said, all of it is designed to maximize power, the cargraphic and a few other valved side deletes are pretty good pieces, but were designed for the stock exhaust setup. I'm sure the cargraphic parts flow fine, but they just won't fit.
I'm sure there are others that would love a nice set of Cargraphic side pipes, if you're interested in picking up 40whp!
#42
I envy you guys going DEFCON III with your GT3 exhaust. I'm contemplating a more modest upgrade and would like to go with a GMG center replacement. Shoot me a pm if this is your current setup and you're going Dundon . .
Thanks.
Thanks.