View Poll Results: What rotors do you use at the track?
Multiple Choice Poll. Voters: 100. You may not vote on this poll
How are your aftermarket track rotors doing? (racing brake, AP racing, Girodisc)
06-09-2016, 06:25 PM
#31
Former Vendor
Brake rotor performance and durability is a matter of design and metallurgy which most our customers do agree that our center mount is better than those traditional surface mount that can dump the brake heat more efficiently.
See design comparison detail here:
https://rennlist.com/forums/991-gt3-...l#post13069941
Metallurgy involves composition (carbon & alloy) contents and micro-structure which is closely related to the casting process which we use only Horizontal molding machine for a better and more uniform casting than of Vertical molding machine.
So I am confident to say that RB builds better rotors, and this is supported and witnessed by those who purchased our replacement rotor rings (for Brembo BBK) and those who have used both.
We have shipped two piece rotors to those heavily tracked communities such as Corvette, Camaro, CTS-V, GTR, STi & EVO with a solid record* for more than 10 years and this is hard to beat.
*Excluding some failure caused by customer's retrofit that deviates to the rotor was designed for.
See design comparison detail here:
https://rennlist.com/forums/991-gt3-...l#post13069941
Metallurgy involves composition (carbon & alloy) contents and micro-structure which is closely related to the casting process which we use only Horizontal molding machine for a better and more uniform casting than of Vertical molding machine.
So I am confident to say that RB builds better rotors, and this is supported and witnessed by those who purchased our replacement rotor rings (for Brembo BBK) and those who have used both.
We have shipped two piece rotors to those heavily tracked communities such as Corvette, Camaro, CTS-V, GTR, STi & EVO with a solid record* for more than 10 years and this is hard to beat.
*Excluding some failure caused by customer's retrofit that deviates to the rotor was designed for.
Last edited by RacingBrake; 06-09-2016 at 07:34 PM.
07-14-2016, 05:59 PM
#32
Former Vendor
Fresh batch Ferodo DS 1.11 pads in, ready for shipment, RL member discount applies - shoot me an e-mail. FREE SHIP as well on Con U.S. -
Pads for 991 GT3- IN STOCK
07-21-2016, 06:40 PM
#34
Rennlist Member
After two weekends at Mid-Ohio my Girodisc rotors are fine. No sign of any cracks.
