sharkster

Sent yours and Eric's today with return labels for the 88's. Sorry about that!

shapiroeric

Thanks Alex!

sharkster

Thx and you'll see how much bigger they are finally

NSD991

Thank you Alex. Any tips on getting the tips closer to the bumper. Mine sit very low. I have them pushed up as high as it gets in the bolt holes etc. your picture looks great, mine sit much lower. Thanks for great service.

sharkster

You betchya.. well the 100s are going to sit up higher but if you adjust the exhaust from the sides you can rotate the whole unit it... However with 100s you don't want to be too close to the bumper

Guest89

Unrivaled customer service!

DES GTS

Thanks for shipping mine out today, Alex. Looking forward to receiving them!

shapiroeric

Absolutely!

sharkster

thank you again fellas means a lot to us

PS Also those of you ordering don't forget to put your shirt size in the order form notes:P

Fadi1

sharkster

Hah.. nice plate too mate!

NSD991

Alex, received the 100mm tips! Thanks for the shirt

sccchiii

I know this has been said over and over, so this is my over again.....DO NOT put the 100mm tips in highest position closest to bumper cutout. The bumper exhaust cutout area will melt or distort if you run your car aggressively. Just another friendly reminder

NSD991

Do you think my tips are too high? I'm 2 inches from the bumper. Thanks!

sccchiii

No they should be fine, if you have that much clearance you're golden