konrad h1

I am planning on replacing all 4 wheel bearings and hubs on my GT3. I have 50K miles on it and after the last track event I noticed the slightest play on a rear wheel so best to get a good baseline and replace all of them. The service manual recommends using a tool part number 00072197940 that fits nicely in the hub and pushes the axle out.
I am unable to easily find a source stateside for this tool. (assembly aid 9794, part number 00072197940)
- Does anyone know of a source to purchase or rent this tool? (I live in Greensboro, NC)
- Any recommendations on alternative options to push the axle off the hub? Needs to be something repeatable as I want to do all 4 corners.

9914s

You don’t need it. Just hit the drive shaft with a blunt chisel. That’s what I did both came out without any issues.
I used the second in the picture.
https://www.harborfreight.com/6-piec...yABEgKcsPD_BwE

inspire

If you really want the OEM tool https://www.rosepassion.com/en/assem...terial-P137913

Shipping shouldn't be too much

9914s

Suncoast has the tool

https://www.suncoastparts.com/product/SKUGT3CL.html