Help with PCCB to Girodisc
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Converting over to steels. Replaced 3 out of the 4 rotors with no issues. My last Girodisk rotor on the drivers rear is not going all the way in properly. Not sure if its cause the parking brake or not. I manually adjusted the parking brake shoe to its fully compressed position with no luck. The other rear rotor went on without any adjustment at all, with no issues.
Tried looking if I had to put it in Parking brake service mode, but my iCarsoft Por II did not list the 911 as a vehicle in that menu (it had the latest software).
Car is ‘16 GT3 RS. What am I missing?
Tried looking if I had to put it in Parking brake service mode, but my iCarsoft Por II did not list the 911 as a vehicle in that menu (it had the latest software).
Car is ‘16 GT3 RS. What am I missing?
Last edited by myevodream; 11-05-2023 at 09:07 PM.
#5
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Updating my own thread here. Turned out to be nothing with the car at all. Mike from Girodisc actually reached out to me and it turns out it may have been a slight issue with the new disc hat. He got me a new one overnight and it fit like a glove, cant say enough about the customer service here, beyond what was expected in a day when everything is virtual and you never feel like you're never speaking to a human, it's so nice to actually feel like a company cares! Thanks so much Mike!
The following 2 users liked this post by myevodream:
LZRD GRN (11-07-2023),
spyderbret (11-07-2023)