becausephilchow

Hi there,

Can anybody confirm if the 991.2 Wing Stands will fit on 991.1, and are taller than the .1 ones?

Thanks!

usrodeo4

It is my understanding the wing struts/stands/uprights have the same fitment between the .1 GT3 RS and the .2 GT3 RS, but I would verify that. As to the wing heights, the .2 rear wing is the same as the GT2 RS rear wing and is definitely taller then the .1 GT3 RS. Fyi, here is the Baron's which are 3 inches taller then the GT2 RS/991.2 GT3 RS (I happen to own a set for my GT2 RS, not on in my avatar pic).
https://www.sharkwerks.com/aero-exte...gt2-rs-BARA491

FogCitySF

The .1 and .2 wing uprights are the same height. I was looking into the .2 uprights (to have more visibility in the rear window) and measured them and they're the same. There's a thread somewhere where a couple of people verified the measurements. The only reason to get the .2 uprights is that you like the look of them better.

Mc21

The Salter Aero risers would help with visibility.

https://salteraero.com/collections/9...rs-991-1-991-2