I cut the wire to my LWBS seatbelt receptacle - airbag problems?
#16
Burning Brakes
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
A seatbelt wire, not an airbag wire.
I disconnected the harness and couldn’t remove the assembly from the seat because the seat was assembled from the factory after the wire had been put into place. I didn’t want to take the seat apart so I cut the wire thinking I had the correct part in my other hand.
I can solder decently. No need for insults, are you one of these drop your car off for service and grab a latte in your loafers type car guys?
I wear loafers too but i like to do all the wrenching on my equipment. I ride liter bikes at the track and don’t trust anyone to do a better job than me when my life is on the line.
So there!
I disconnected the harness and couldn’t remove the assembly from the seat because the seat was assembled from the factory after the wire had been put into place. I didn’t want to take the seat apart so I cut the wire thinking I had the correct part in my other hand.
I can solder decently. No need for insults, are you one of these drop your car off for service and grab a latte in your loafers type car guys?
I wear loafers too but i like to do all the wrenching on my equipment. I ride liter bikes at the track and don’t trust anyone to do a better job than me when my life is on the line.
So there!
Last edited by Johnny Five; 05-27-2020 at 12:09 AM.
The following users liked this post:
pinmaniac (08-17-2020)