INTRODUCING the RENNtorq Center Lock Removal Tool for 991/997 applications
The following users liked this post:
RENNtorq (04-07-2024)
The following users liked this post:
RENNtorq (04-07-2024)
The following users liked this post:
RENNtorq (04-07-2024)
The following users liked this post:
RENNtorq (04-07-2024)
The following users liked this post:
RENNtorq (04-07-2024)
#518
Rennlist Member
#520
Rennlist Member
All right.....let's do it!
Same plan as before, but with a little extra if we get to 15:
Discount will be
$125 for >5 participants
$150 for >10 participants
$200 for 15 or more participants
We will plan on closing it on 4/19/24
Please reconfirm here if you are in, and spread the word. Without Rennlist there would be no RENNtorq.
Thanks,
John
Same plan as before, but with a little extra if we get to 15:
Discount will be
$125 for >5 participants
$150 for >10 participants
$200 for 15 or more participants
We will plan on closing it on 4/19/24
Please reconfirm here if you are in, and spread the word. Without Rennlist there would be no RENNtorq.
Thanks,
John
1. FourFourTwo
2. eagletangogreen
3. dixonk
4. jyu0
5. silencei2
6. dpwracing
7. bigrpowr
8. tonsoframen
9. DEALKLR911
#521
Rennlist Member
Since my SRS is delayed, and I was planning on using this tool to change out my mag wheels, I think I am going to wait until the car comes in and decide what to do. There might be another viable option by then as well. Sorry about this.
1. FourFourTwo
2. eagletangogreen
3. dixonk
4. silencei2
5. dpwracing
6. bigrpowr
7. tonsoframen
8. DEALKLR911
1. FourFourTwo
2. eagletangogreen
3. dixonk
4. silencei2
5. dpwracing
6. bigrpowr
7. tonsoframen
8. DEALKLR911
#523
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Okay, we are currently sitting at eight with a few days to go. If we can find two more than everyone gets a bigger discount so check in with your PCar friends to see if anyone else might be interested.
We'll close the GB this Friday. Once closed I'll send out a coupon code to each person in the buy to use at checkout for the discount.
All the tools will ship within 7-10 days of the conclusion of the GB.
Thanks,
John
1. FourFourTwo
2. eagletangogreen
3. dixonk
4. silencei2
5. dpwracing
6. bigrpowr
7. tonsoframen
8. DEALKLR911
We'll close the GB this Friday. Once closed I'll send out a coupon code to each person in the buy to use at checkout for the discount.
All the tools will ship within 7-10 days of the conclusion of the GB.
Thanks,
John
1. FourFourTwo
2. eagletangogreen
3. dixonk
4. silencei2
5. dpwracing
6. bigrpowr
7. tonsoframen
8. DEALKLR911
__________________
#524
Rennlist Member
Okay, we are currently sitting at eight with a few days to go. If we can find two more than everyone gets a bigger discount so check in with your PCar friends to see if anyone else might be interested.
We'll close the GB this Friday. Once closed I'll send out a coupon code to each person in the buy to use at checkout for the discount.
All the tools will ship within 7-10 days of the conclusion of the GB.
Thanks,
John
1. FourFourTwo
2. eagletangogreen
3. dixonk
4. silencei2
5. dpwracing
6. bigrpowr
7. tonsoframen
8. DEALKLR911
We'll close the GB this Friday. Once closed I'll send out a coupon code to each person in the buy to use at checkout for the discount.
All the tools will ship within 7-10 days of the conclusion of the GB.
Thanks,
John
1. FourFourTwo
2. eagletangogreen
3. dixonk
4. silencei2
5. dpwracing
6. bigrpowr
7. tonsoframen
8. DEALKLR911
#525
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Question regarding the delrin piece that gets pressed against a spoke of the wheel during operation. Is this piece removable? I have a set of HRE 501s (mesh wheels) that I would like this tool to work with. Will I be able to remove the delrin piece to customize in hopes that I can get it to work with these rims?
The HRE501s are a very tough wheel for a torque multiplier application. The spoke gaps are very small, and the spokes themselves are thin (as you approach the OD of the wheel) so those particular wheels really call for a custom reaction arm with the right sizing and distribution of force. If you would like to discuss options please give me a call tomorrow and I can walk through it with you.