Agency Power Clubsport Replica Rollbar
#1
Agency Power Clubsport Replica Rollbar
https://www.agency-power.com/porsche...orts-roll-bar/
Left: OEM Clubsport, Right: AgencyPower replica
Looks like its 100% reproduction of the factory Clubsport bar.
Has anyone had any experience with it? The rear legs bolt to the shock tower, where do the front legs attache to?
Left: OEM Clubsport, Right: AgencyPower replica
Looks like its 100% reproduction of the factory Clubsport bar.
Has anyone had any experience with it? The rear legs bolt to the shock tower, where do the front legs attache to?
#4
I think I remember either Trackcar or a euro member mention that the Factory Clubsport bar front feet bolt to plates welded into the floor behind the seats. The same as my ‘07RS.
Unfortunately ROW 991 cars do not have the welded plates. I would hesitate punching holes in the 991 floor...not safe.
Good looking bar though.
Unfortunately ROW 991 cars do not have the welded plates. I would hesitate punching holes in the 991 floor...not safe.
Good looking bar though.
#7
It looks like it bolts on the floor just behind the cross member that most aftermarket 991 GT3 roll bars mount on.
Welding in a reinforcement plate on there should not be too hard.
Will any ROW clubsport owners post a picture of the mounting points under the carpet of your bars?
Last edited by Wind911; 12-04-2017 at 06:18 PM.
Trending Topics
#9
#10
I would strongly suggest you don't buy anything from AP. I have had a wonderful experience with them and their "quality" over the past few weeks and I wish I had been responsible enough to do some research and ask a few more people before I had purchased anything from them. You can read about my luck here:
https://rennlist.com/forums/991-gt3-...l#post14648938
Regardless of my problems, I wouldn't trust my car or my possible safety with any product they make and/or sell.
Best of luck,
Dan
https://rennlist.com/forums/991-gt3-...l#post14648938
Regardless of my problems, I wouldn't trust my car or my possible safety with any product they make and/or sell.
Best of luck,
Dan