Titanium Roll Cage
#16
Anyone possibly know of someone manufacturing a 'harness bar' version out of Aluminum? I'm not looking to install 50 more lbs in the car if possible... and just would like a lightweight Harness Bar to hold me in the seat better for AutoX and occasional track day?
Best Regards,
Dave
Best Regards,
Dave
#17
Pro
#18
I think this cage is rad, but I know Akro and Ti, and I am scared to know what they will charge for it. It will be worth every penny, but it will be an offensively large amount of them.
#19
Rennlist Member
I'd like to know what it weighs...and then what it costs. It's going to be $$.
Oh and magnesium cage might be a bad idea...magnesium is very brittle...like when you flip on to the roof and it snaps into pieces...might be a good safety feature.
Oh and magnesium cage might be a bad idea...magnesium is very brittle...like when you flip on to the roof and it snaps into pieces...might be a good safety feature.
The following users liked this post:
koja997 (04-03-2020)
#21
Nordschleife Master
A titanium roll bar has to be $4K+. The inability to get the Ti roll bar with the Weissach package in the U.S. is one reason I didn't opt for the Weissach package. I would have even opted for it if they would just box it and ship it with car but I was told that won't happen. The WP was still $18k sans roll bar that they get in Europe for the same $. It was ridiculous to pay for something that should be included but will not be. At least PAG should reduce the WP in the States by $4K or so for the lack of the roll bar here.
#23
To make it as painlessly bolt-on and as OEM looking as possible, buy from one of the reputable tuners who can also paint it in any color and finish to your pleasing.
#24
North America spec cars do not have the OEM mounting points for the roll cage made by Eisenmann for the Porsche Clubsport package.
To make it as painlessly bolt-on and as OEM looking as possible, buy from one of the reputable tuners who can also paint it in any color and finish to your pleasing.
To make it as painlessly bolt-on and as OEM looking as possible, buy from one of the reputable tuners who can also paint it in any color and finish to your pleasing.
#25
Addict
Rennlist Member
Rennlist Member
I don't think the newest Magnesium alloys in larger forms (used in wheels, etc.) is flammable like those pure Mg ribbons in school...
#26
Get this finished in any color you like and forget about anything else.
#27
Rennlist Member
Originally Posted by GrantG
I don't think the newest Magnesium alloys in larger forms (used in wheels, etc.) is flammable like those pure Mg ribbons in school...
#28
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
BBi StreetCup Roll Bar is very close to OEM design, TBH well priced as well.
Get this finished in any color you like and forget about anything else.
Get this finished in any color you like and forget about anything else.
__________________
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram
#30
Three Wheelin'
I have just recently learned that Porsche is requesting very limited numbers of new Ti cages and there vendor is not Akropovic for the new cages. I am not going to say who the current vendor is but they are an Aerospace/Automotive prototyping concern in Germany.
The following users liked this post:
RKGT3 (02-25-2021)