FABSPEED MOTORSPORT | 991 GT3 / GT3 RS Long Tube Competition Race Header System
#31
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Join Date: Mar 2017
Location: Philadelphia, Pennsylvania
Posts: 2,449
Received 676 Likes
on
430 Posts
That would be fantastic. If only we had the space. Unfortunately, there is only so much space to do everything. You can't build the LT headers correctly without getting rid of some pieces to the puzzle. Long tube with a cat and side mufflers would be to long to fit in the envelope of the car so you have to get rid of something.
#32
Three Wheelin'
Hi Fabspeed, I had a few questions in my previous thread I was wondering if you could help answer.
1. Are 991.2 headers new or the same as the ones before for the 991.1 GT3 and GT3 RS?
2. Are they made out of 321SS or T304? Is T304 suffice or is it more likely to crack than the 321SS?
3. Will the o2 bungs that eliminate CELs. If there are any CEL’s can we return the product. The Dundon o2 bungs look much longer, is the reason I ask.
4. Can you make valveless side pipes or a single side pipe to work with aftermarket rear center sections?
Thank you
1. Are 991.2 headers new or the same as the ones before for the 991.1 GT3 and GT3 RS?
2. Are they made out of 321SS or T304? Is T304 suffice or is it more likely to crack than the 321SS?
3. Will the o2 bungs that eliminate CELs. If there are any CEL’s can we return the product. The Dundon o2 bungs look much longer, is the reason I ask.
4. Can you make valveless side pipes or a single side pipe to work with aftermarket rear center sections?
Thank you
#33
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Hi Fabspeed, I had a few questions in my previous thread I was wondering if you could help answer.
1. Are 991.2 headers new or the same as the ones before for the 991.1 GT3 and GT3 RS?
2. Are they made out of 321SS or T304? Is T304 suffice or is it more likely to crack than the 321SS?
3. Will the o2 bungs that eliminate CELs. If there are any CEL’s can we return the product. The Dundon o2 bungs look much longer, is the reason I ask.
4. Can you make valveless side pipes or a single side pipe to work with aftermarket rear center sections?
Thank you
1. Are 991.2 headers new or the same as the ones before for the 991.1 GT3 and GT3 RS?
2. Are they made out of 321SS or T304? Is T304 suffice or is it more likely to crack than the 321SS?
3. Will the o2 bungs that eliminate CELs. If there are any CEL’s can we return the product. The Dundon o2 bungs look much longer, is the reason I ask.
4. Can you make valveless side pipes or a single side pipe to work with aftermarket rear center sections?
Thank you
Yes - just verified them to fit the .2's
2. Are they made out of 321SS or T304? Is T304 suffice or is it more likely to crack than the 321SS?
T304 - fatigue strength/temperature factors between T304/T321 are minimally different and T304 has proven to be more than sufficient for these applications.
3. Will the o2 bungs that eliminate CELs. If there are any CEL’s can we return the product. The Dundon o2 bungs look much longer, is the reason I ask.
We have a great success rate with our O2 Sensor Spacers w/Mini-Cats but can never guarantee them to 100% prevent triggering Catalyst Efficiency CELs.
4. Can you make valveless side pipes or a single side pipe to work with aftermarket rear center sections?
Yes - we offer our Side Muffler Bypass Pipes in Valved or Non-Valved
Feel free to PM me with any questions or forum pricing
__________________
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com
#34
Three Wheelin'
1. Are 991.2 headers new or the same as the ones before for the 991.1 GT3 and GT3 RS?
Yes - just verified them to fit the .2's
2. Are they made out of 321SS or T304? Is T304 suffice or is it more likely to crack than the 321SS?
T304 - fatigue strength/temperature factors between T304/T321 are minimally different and T304 has proven to be more than sufficient for these applications.
3. Will the o2 bungs that eliminate CELs. If there are any CEL’s can we return the product. The Dundon o2 bungs look much longer, is the reason I ask.
We have a great success rate with our O2 Sensor Spacers w/Mini-Cats but can never guarantee them to 100% prevent triggering Catalyst Efficiency CELs.
4. Can you make valveless side pipes or a single side pipe to work with aftermarket rear center sections?
Yes - we offer our Side Muffler Bypass Pipes in Valved or Non-Valved
Feel free to PM me with any questions or forum pricing
Yes - just verified them to fit the .2's
2. Are they made out of 321SS or T304? Is T304 suffice or is it more likely to crack than the 321SS?
T304 - fatigue strength/temperature factors between T304/T321 are minimally different and T304 has proven to be more than sufficient for these applications.
3. Will the o2 bungs that eliminate CELs. If there are any CEL’s can we return the product. The Dundon o2 bungs look much longer, is the reason I ask.
We have a great success rate with our O2 Sensor Spacers w/Mini-Cats but can never guarantee them to 100% prevent triggering Catalyst Efficiency CELs.
4. Can you make valveless side pipes or a single side pipe to work with aftermarket rear center sections?
Yes - we offer our Side Muffler Bypass Pipes in Valved or Non-Valved
Feel free to PM me with any questions or forum pricing
#35
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Ultra Violet 991.1 GT3 RS - VS - Miami Blue 991.2 GT3 - Both equipped with our Competition Long Tube Headers
We were lucky enough to have both of these gorgeous machines in the shop at the same time - so we had to have a friendly competition.
Who do you think the winner is?
For more info: https://www.fabspeed.com/porsche-991...header-system/
We were lucky enough to have both of these gorgeous machines in the shop at the same time - so we had to have a friendly competition.
Who do you think the winner is?
For more info: https://www.fabspeed.com/porsche-991...header-system/
#37
Never understood the point of a "rev battle" with the GT3 at a standstill, can't rev the car past a certain RPM and they all virtually sound the same.
Can we get some in-cabin video or fly-by's?
Can we get some in-cabin video or fly-by's?
#39
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
They really do - thank you!
#41
Racer
#42
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
I think that's a great upgrade and usually my recommendation for starter upgrades - gives you a more aggressive tone without being too overbearing. Sheds a good bit of weight too
#43
Racer
Hey Alec. Any updates on the cars that installed just your side muffler bypass pipes for the .2 GT3. How do they compare with those who just replaced the center muffler?
#45
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
I drove a .2 GT3 with our Valved Side Muffler Bypass and it really gave the car a nice tone, deep/throaty and by no means obnoxious or overbearing. I personally didn't notice any drone either. The Center Muffler Bypass is a bit more aggressive.
I'll see if I can find some .2 videos. In the meantime, here is a .1 GT3 with just our Valved Side Muffler Bypass for reference: