Rennlist - Porsche Discussion Forums

Rennlist - Porsche Discussion Forums (https://rennlist.com/forums/)
-   991 GT3 GT3RS and 911R (https://rennlist.com/forums/991-gt3-gt3rs-and-911r-229/)
-   -   LWBS Protective Bolster Covers (https://rennlist.com/forums/991-gt3-gt3rs-and-911r/957952-lwbs-protective-bolster-covers.html)

Crazy Eddie 08-13-2018 04:58 PM


Originally Posted by GeoJoe (Post 15212603)
Hey Eddie... my GT4 is going to a new home and along with it are your excellent covers. They did their job!

PM coming for a new set for my PTS GT3!

:bowdown: Thank You Joe
I saw your Oak Green Metallic :thumbsup:
Sorry to see the GT4 go, it was a beauty :(

K_style 08-16-2018 03:38 PM

Would you only sell the driver side?

Crazy Eddie 08-18-2018 01:01 AM


Originally Posted by K_style (Post 15221237)
Would you only sell the driver side?

Sorry no, only sold in pairs
In truth .... I would be more interested in protecting the pass side than the drivers side ... I know how to get in the car seat ... it's the passengers that worry me :rolleyes:
Kind regards
Ed

K_style 08-21-2018 12:42 PM


Originally Posted by Crazy Eddie (Post 15225043)
Sorry no, only sold in pairs
In truth .... I would be more interested in protecting the pass side than the drivers side ... I know how to get in the car seat ... it's the passengers that worry me :rolleyes:
Kind regards
Ed

Wanted to put a normal seat on the passenger side.. haha
I will send you an email for the order!!

Crazy Eddie 08-21-2018 12:56 PM


Originally Posted by K_style (Post 15232638)
Wanted to put a normal seat on the passenger side.. haha
I will send you an email for the order!!

:thumbsup:
yes that would be great
[email protected]
best regards
Ed

Chuckuzzo 08-30-2018 09:10 PM

Email sent, Ed.

Porsches 08-31-2018 07:49 AM

What is the lead time for these?

tgibrit 08-31-2018 06:43 PM


Originally Posted by Gasman85 (Post 15131296)
Is there a trick to getting the front piece a little tighter underneath the "grip handle?" Mine is also a little long on my 2018 and is bunching up quite a bit by the seatbelt passthrough and the top edge seems to be about one cm too long and is starting to wrinkle because it is folding down.

Thanks Ed, just installed mine - I know you sent them to me a while ago! Mine also have the same issue under the grip handle - its minor, very happy with the product, but if you had advice on how to remove the bunching it would be appreciated. You had mentioned in another post "there is a slight trick to get the front bolster to sit back a little, I need to do a video or a pictorial"

Again great product from a great vendor.

BlazinPond 09-09-2018 09:41 AM

I picked up a set and they match the factory black and red nicely.

Question, how do you properly place the longer strip w/ velcro?
I have it going near the base of seat belt but not entirely sure where its recommended.

I picked mine up from RFGGT3 since he needed a new set w/ silver vs red.
Just didn't get any directions and it's less obvious than I would have thought!

sampelligrino 10-06-2018 12:52 AM

Had the pleasure of stopping by Ed's place today to meet the legend himself and get his help installing the bolster guards, I should have had him autograph them :) They look OEM and are a must have for anyone with LWBS in my opinion, really really happy I got them. You can tell Ed is a perfectionist and cares about all the little details, everything looks perfect. To anyone on the fence, get these!!

Ed - was awesome to talk shop and hang out in the afternoon, appreciate the help my friend :cheers:


https://cimg8.ibsrv.net/gimg/rennlis...1528b9bee1.jpg

Bgee55 10-06-2018 01:13 PM

Are these in stock or made to order?

SToronto 10-06-2018 10:23 PM


Originally Posted by sampelligrino
Had the pleasure of stopping by Ed's place today to meet the legend himself and get his help installing the bolster guards, I should have had him autograph them :) They look OEM and are a must have for anyone with LWBS in my opinion, really really happy I got them. You can tell Ed is a perfectionist and cares about all the little details, everything looks perfect. To anyone on the fence, get these!!

Ed - was awesome to talk shop and hang out in the afternoon, appreciate the help my friend :cheers:


https://cimg8.ibsrv.net/gimg/rennlis...1528b9bee1.jpg

What's the challenge with the install?

Are these the same ones Matt Moreman (Obsessed Garage) did videos on? I recall some frustration with the install.

Thinking about getting these.

joejenie 10-06-2018 10:55 PM

Ed's are made to order. I just installed them on my 997 3RS and it took about 10 minutes per side tops. Fit and worked perfectly. I ordered some for my 3RS that is coming as well, but not installed. Those ones look a little tougher.

sampelligrino 10-07-2018 12:58 AM


Originally Posted by SToronto (Post 15342819)
What's the challenge with the install?

Are these the same ones Matt Moreman (Obsessed Garage) did videos on? I recall some frustration with the install.

Thinking about getting these.

Install was seamless but just wanted the master's touch, I told Ed I am scared of setting my car on fire giving her a wash and was in the area anyways

Crazy Eddie 10-12-2018 12:03 AM


Originally Posted by BlazinPond (Post 15276706)
I picked up a set and they match the factory black and red nicely.

Question, how do you properly place the longer strip w/ velcro?
I have it going near the base of seat belt but not entirely sure where its recommended.

I picked mine up from RFGGT3 since he needed a new set w/ silver vs red.
Just didn't get any directions and it's less obvious than I would have thought!

I think I PM'ed you on this ? Correct ? Are you all taken care of ?
Regards
Ed


All times are GMT -3. The time now is 02:44 PM.


© 2019 MH Sub I, LLC dba Internet Brands