|
Originally Posted by Crazy Eddie
(Post 15895096)
I think if you go back a few pages, you will see that putting on these covers is really not a big challenge On a scale of 1-10 I would give it a 5
I am not sure what you mean by creasing ? ... If a number of those who posted issues with installing had read the email I sent ( With the instructions ) I think it would have been a breeze to install these Maybe some who posted earlier can chime in .... But if you go thorough this thread, I think you we have the answers to your questions? If you have any other questions please feel free to email me ed@pencom.com Best regards Ed |
Originally Posted by Porsch2018
(Post 15894249)
Nice looking but I have a few questions. Some of the installs look pretty good but some show creasing, so is the installation a bit challenging? Some people are having problems reinserting the seat switch, is that a fairly common issue?
These are pictures taken by a local Rennlister who came by my house to have his existing covers switched from the other vendors BEFORE (HIS) to Mine (AFTER) His ( the other vendors ) https://cimg2.ibsrv.net/gimg/rennlis...fdc2384e0a.jpg Mine( EdGuard) https://cimg4.ibsrv.net/gimg/rennlis...5e1a212813.jpg Is this the case ? There is no crease in mine ..... ? Kind regards Ed |
Eddies product is great and following the instructions makes an easy install. If you roll back through the many posts on this subject you will see lots of very positive comments on Eddie and the covers. To suggest these covers are for the next owner is nuts. Now floor mats are for the next owner in that same vein.
|
Originally Posted by white6speed
(Post 15895834)
To suggest these covers are for the next owner is nuts. Now floor mats are for the next owner in that same vein.
I saw that comment in another thread and that is just not valid, in fact, it borders on silly. By that reasoning we should not maintain our homes either since it is potentially for the "next owner". |
Fully agree with you. :thumbup: Not because we are OCD. We simply take pride of what we own and try to preserve our possessions as new or as clean as possible.
Bubblewrap anyone? :roflmao: Drive safe, GT3RS-Fan1
Originally Posted by Porsch2018
(Post 15895842)
I saw that comment in another thread and that is just not valid, in fact, it borders on silly. By that reasoning we should not maintain our homes either since it is potentially for the "next owner".
|
Originally Posted by GT3RS-Fan1
(Post 15896113)
Not because we are OCD.
Bubblewrap anyone? :roflmao: Drive safe, GT3RS-Fan1 Hilarious but all true.:cheers: PS: can I get the bubble wrap with Red Stitching???? |
First let me thank ED for his excellent product, sales & follow up service.. The product is fantastic and I'm very happy with it.
https://cimg8.ibsrv.net/gimg/rennlis...c2a6614ae6.jpg https://cimg9.ibsrv.net/gimg/rennlis...117dd2f8df.jpg https://cimg0.ibsrv.net/gimg/rennlis...a091805962.jpg |
Super easy to install. Bought a set of Ed's for my GT4, and moved them to my GT3. When I took them out of the '4 the bolsters were in perfect condition.
For me, it's piece of mind in the event they are marred by accident. Much less expensive to fix the covers than the seat. |
Went to Ed's house on very hot 100F+ about 10 days ago day and had him install them for me :)
|
Here are a couple shots of the EO bolster protectors on my GT3T. The passenger side looks ok, but the driver side turned out really poor. Looks to be poor/thin leather. No amount of massaging and letting sit in the heat helps. Will be ordering a set of Ed Guards when he does my LWB inserts. He showed me some samples at his place last week and the difference in quality was night and day. But this isn’t surprising given Ed’s commitment to craftsmanship.
https://cimg3.ibsrv.net/gimg/rennlis...496fe17b0.jpeg https://cimg4.ibsrv.net/gimg/rennlis...481e3662b.jpeg |
Originally Posted by adf
(Post 15930927)
Here are a couple shots of the EO bolster protectors on my GT3T. The passenger side looks ok, but the driver side turned out really poor. Looks to be poor/thin leather. No amount of massaging and letting sit in the heat helps. Will be ordering a set of Ed Guards when he does my LWB inserts. He showed me some samples at his place last week and the difference in quality was night and day. But this isn’t surprising given Ed’s commitment to craftsmanship.
https://cimg3.ibsrv.net/gimg/rennlis...496fe17b0.jpeg https://cimg4.ibsrv.net/gimg/rennlis...481e3662b.jpeg |
Originally Posted by adf
(Post 15930927)
Here are a couple shots of the EO bolster protectors on my GT3T. The passenger side looks ok, but the driver side turned out really poor. Looks to be poor/thin leather. No amount of massaging and letting sit in the heat helps. Will be ordering a set of Ed Guards when he does my LWB inserts. He showed me some samples at his place last week and the difference in quality was night and day. But this isn’t surprising given Ed’s commitment to craftsmanship.
|
I want to point out that Frank at EO reached out after this post and offered to do whatever it took to make things right including offering a full refund. I'm willing to believe that your mileage may vary and it's possible there was some really unusual problem with my bolsters. I've agreed to return the bolsters to him so his team can understand what went wrong with this set. Good on him for standing behind his work.
Originally Posted by adf
(Post 15930927)
Here are a couple shots of the EO bolster protectors on my GT3T. The passenger side looks ok, but the driver side turned out really poor. Looks to be poor/thin leather. No amount of massaging and letting sit in the heat helps. Will be ordering a set of Ed Guards when he does my LWB inserts. He showed me some samples at his place last week and the difference in quality was night and day. But this isn’t surprising given Ed’s commitment to craftsmanship.
|
https://cimg8.ibsrv.net/gimg/rennlis...cf9628878.jpeg
First thing i did was ppf. Second thing was install Ed’s covers. Very happy with the results. https://cimg9.ibsrv.net/gimg/rennlis...860b3c8bd.jpeg |
I noticed some wear beginning on the driver's seat headrest embroidery on my RS from my helmet on the track. Just asked Ed to make a head cover for the seat with silver stitching. It is perfect and fits like a glove.
Kudos Ed. |
| All times are GMT -3. The time now is 06:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands