You guys have to see this.
#31
Funny. My car has been in San Diego since February 12... About 6 weeks. I've been told the VPC there is covered but exposed on the sides. Better than nothing, but far from ideal. I would much rather she be shipped here; at least I'd know where she is and how she's being stored. Going to need a very thorough detail.
#32
Yes, my car hit the ground the day after the stop-sale was issued. I saw the initial post about it here, which was the emotional equivalent of hitting a brick wall. In a roller coaster. Without even being properly strapped in. And then a puma shows up to eat you after telling you it doesn't know when your GT3 will be delivered.
I can't believe it's been 6 weeks. Back then, my only concern was whether or not my car would be processed before February 20th, which was when the ship heading this way was scheduled to depart. And if my SharkWerks bypass would get here before my car arrived.
Did it ever. It's been sitting under my coffee table for nearly two months now.
#33
Whether 2 weeks or 6 weeks, we're all in the same unpleasant situation. I'd only want my car sitting at port for a few days, let alone a few weeks. Who knows what could happen? (Though I try not to think about it). Yes, my car hit the ground the day after the stop-sale was issued. I saw the initial post about it here, which was the emotional equivalent of hitting a brick wall. In a roller coaster. Without even being properly strapped in. And then a puma shows up to eat you after telling you it doesn't know when your GT3 will be delivered. I can't believe it's been 6 weeks. Back then, my only concern was whether or not my car would be processed before February 20th, which was when the ship heading this way was scheduled to depart. And if my SharkWerks bypass would get here before my car arrived. Did it ever. It's been sitting under my coffee table for nearly two months now.
#34
Addict
Rennlist Member
Rennlist Member
Something weird about the 2 motor pictures
The handle on the carts are different, one is more flexed than the other
I think these are 2 different motors.....
The handle on the carts are different, one is more flexed than the other
I think these are 2 different motors.....
#35
#36
Race Director
It appears to me that the vacuum valve for the sport exhaust comes after the side mufflers so it can't be bypassing them. It looks instead like the valve opens a second pipe into the center muffler. Maybe I'm looking at this wrong....
#37
Race Director
#38
Rennlist Member
If these pictures were taken recently, for what other reason are they removing the engine other than anticipating an immediate replacement?
Does anyone have any idea as to how many GT3 engines Porsche manufacturers daily? I would guess they could do 20-25 provided they have the parts.
Does anyone have any idea as to how many GT3 engines Porsche manufacturers daily? I would guess they could do 20-25 provided they have the parts.
#39
some of you are talking about the cars sitting out at the port. My dealer has a black and a white GT3 with the window stickers on them (assume customers have not paid for them) sitting outside for the past 4 weeks. Stopped by today and both cars are full of bird crap. If one of those was my car I would send pictures to PNA to let them know the lack of respect the dealer has for these cars and get added compensation.
#40
Hope you made a good trophy out of it.
some of you are talking about the cars sitting out at the port. My dealer has a black and a white GT3 with the window stickers on them (assume customers have not paid for them) sitting outside for the past 4 weeks. Stopped by today and both cars are full of bird crap. If one of those was my car I would send pictures to PNA to let them know the lack of respect the dealer has for these cars and get added compensation.
People with cars at port like 0Q991 and should ask the same of Porsche or their dealer as well. The paint will most certainly not be factory fresh by now.
#41
Definitely the same, just different angles. Funny how the mind lets people see what they want to see. Hope you made a good trophy out of it. That's a shame. I've done my own detailing for over 6 years now with high end products, but dealers tend to just spray and wash. I'd have them pay for an actual trusted detailer to take care of the vehicle. People with cars at port like 0Q991 and should ask the same of Porsche or their dealer as well. The paint will most certainly not be factory fresh by now.
#42
MyenShi -- Agreed. That's my plan. But if the compensation is decent, I'll let it go and toss it up as having been included in whatever $ figure there is...with the big assumption that there IS a $ figure. If not, I will most certainly ask for an allowance to have the car taken care of at a detailer I trust.
Was going to have a detailer friend apply Opticoat on my car. He was going to charge me minimum cost, especially as the paint should be fine right out of the factory. The irony.
#43
If these pictures were taken recently, for what other reason are they removing the engine other than anticipating an immediate replacement?
Does anyone have any idea as to how many GT3 engines Porsche manufacturers daily? I would guess they could do 20-25 provided they have the parts.
Does anyone have any idea as to how many GT3 engines Porsche manufacturers daily? I would guess they could do 20-25 provided they have the parts.
Porsche sold 162,145 cars in calendar 2013. Assuming that the engine factory was in operation for 250 days, that's about 650 engines per day. Normally engines of all types are intermingled on the production line, but there is no reason, other than parts supply, that they couldn't produce nothing but GT3 engines for a day or two. So production capacity is not in the least in the critical time path. It's probably parts supply and/or other logistical issues.
Another interesting fact: The time from when an engine block enters the assembly line until the completed and tested engine rolls off of the assembly line is only 4 hours! Given this, it's easy to agree that producing a new engine is going to be a lot faster than disassembling and reassembling one to replace an internal part. More expensive yes, but a lot faster!
#44
Rennlist Member
I did a factory tour at Stuttgart in January and thus am familiar with some of their production capacities. Porsche produces cars at Stuttgart (911s), Leipzig (Cayennes and Panameras), and Osnabruck (Caymans and Boxsters). The engines for ALL of these cars are produced by the engine factory in Stuttgart. I'm not positive about the engines for Boxsters and Caymans, but they only account for 16% of Porsche's total output.
Porsche sold 162,145 cars in calendar 2013. Assuming that the engine factory was in operation for 250 days, that's about 650 engines per day. Normally engines of all types are intermingled on the production line, but there is no reason, other than parts supply, that they couldn't produce nothing but GT3 engines for a day or two. So production capacity is not in the least in the critical time path. It's probably parts supply and/or other logistical issues.
Another interesting fact: The time from when an engine block enters the assembly line until the completed and tested engine rolls off of the assembly line is only 4 hours! Given this, it's easy to agree that producing a new engine is going to be a lot faster than disassembling and reassembling one to replace an internal part. More expensive yes, but a lot faster!
Porsche sold 162,145 cars in calendar 2013. Assuming that the engine factory was in operation for 250 days, that's about 650 engines per day. Normally engines of all types are intermingled on the production line, but there is no reason, other than parts supply, that they couldn't produce nothing but GT3 engines for a day or two. So production capacity is not in the least in the critical time path. It's probably parts supply and/or other logistical issues.
Another interesting fact: The time from when an engine block enters the assembly line until the completed and tested engine rolls off of the assembly line is only 4 hours! Given this, it's easy to agree that producing a new engine is going to be a lot faster than disassembling and reassembling one to replace an internal part. More expensive yes, but a lot faster!
Very informative. The parts availability will be the critical piece.
#45
Cars being assembled move along the assembly line at a steady pace. Along the way there are work stations manned by a robot or a person, and specific tasks are performed at each station. The steady pace of the assembly line is such that each station has 3 minutes to complete its assigned tasks.
One exception to this time block is the infamous "marriage" station, where the drivetrain is installed into the chassis. This "marriage" is performed by two workers who following the moving car across two stations.
Thus the "marriage" is completed from start to finish in 6 minutes, requiring a total of 12 man-minutes! Admittedly they have all of the right heavy lifting equipment, but this suggests that mounting a completed engine assembly into a car is not god-awful complicated.