Best roll cage for GT3 991.2
#16
Burning Brakes
This is would be perfect. Can’t any of the US fabricators make this for us?
There is actually a company in Australia who makes one. I reached out to them once to inquire about purchasing one. They wouldn't export it.
Check this out: http://autohaushamilton.com.au/news/...ty-harness-bar
I'd love to get one.
- Chris.
Check this out: http://autohaushamilton.com.au/news/...ty-harness-bar
I'd love to get one.
- Chris.
#17
This is maybe not as clean and simple as you have in mind, but with no unnecessary crossbars, the view is totally unobstructed, you can still get some bags/gear in the back, and the attachment points are close to the seats as they should be. Clearly this is a harness bar, not roll cage, but I think many of the bolt-in harness/roll bars don't really provide much rollover protection. I just saw two of these installed over the weekend at Barber and thought it was a really appealing option: https://www.teambgb.com/991-Harness-Bar-p/991bar.htm
#18
This is maybe not as clean and simple as you have in mind, but with no unnecessary crossbars, the view is totally unobstructed, you can still get some bags/gear in the back, and the attachment points are close to the seats as they should be. Clearly this is a harness bar, not roll cage, but I think many of the bolt-in harness/roll bars don't really provide much rollover protection. I just saw two of these installed over the weekend at Barber and thought it was a really appealing option: https://www.teambgb.com/991-Harness-Bar-p/991bar.htm
BGB is active in the GT4 section. Perhaps they can chime in here. Can you @mention in threads?
#19
Three Wheelin'
I have the CMS - installed it myself with only minor psychological pain and a couple skinned knuckles - not for the faint of heart - a six pack and your favorite cuss words help. Fit and finish are great, so is customer service and color matching.
But the rear view is definitely impacted. The fit and alignment relative to the stock GT3 wing make rear viewing marginal, but it's pretty close to the headliner, and I would guess the problem is similar across all these. Others with a curved main hoop may be a bit better, but I didn't like the mount points for the belts or the main hoop of some of the other bars.
But the rear view is definitely impacted. The fit and alignment relative to the stock GT3 wing make rear viewing marginal, but it's pretty close to the headliner, and I would guess the problem is similar across all these. Others with a curved main hoop may be a bit better, but I didn't like the mount points for the belts or the main hoop of some of the other bars.
#20
Rennlist Member
Will someone, anyone... just make a rear shock tower/harness bar? For those that don't want to install 50 extra pounds in the back of the car and just want something to mount our harnesses too?
Would love a clean simple rear bar that goes straight across.
Best Regards,
Dave
Would love a clean simple rear bar that goes straight across.
Best Regards,
Dave
For a simple harness bar, what about this one? Anyone using it? Looks like the straps are mounted further away from the back of the seat than others. Acceptable?
https://www.tpcracing.com/product/99...y-harness-bar/
#21
For a simple harness bar, what about this one? Anyone using it? Looks like the straps are mounted further away from the back of the seat than others. Acceptable?
https://www.tpcracing.com/product/99...y-harness-bar/
https://www.tpcracing.com/product/99...y-harness-bar/
Brey Krause did the same thing... they recently made a harness mount bar for the 991 but it attaches to rear seatbelt anchor points missing on the GT3.
#22
Rennlist Member
Well that kinda sucks then, but thanks for the quick reply anyway!
#23
My new roll cage from BBI should be shipped today. Having it powder coated in gun metal which should look good in the black/grey interior. Looking to install next Wednesday. Will send photos.
#24
This is maybe not as clean and simple as you have in mind, but with no unnecessary crossbars, the view is totally unobstructed, you can still get some bags/gear in the back, and the attachment points are close to the seats as they should be. Clearly this is a harness bar, not roll cage, but I think many of the bolt-in harness/roll bars don't really provide much rollover protection. I just saw two of these installed over the weekend at Barber and thought it was a really appealing option: https://www.teambgb.com/991-Harness-Bar-p/991bar.htm
the horizontal bar actually helps me load stuff into the back.
as for rollover protection....probably not as strong as the ones with cross bars, but i am personally ok with that.
#25
Rennlist Member
I installed a BBI cage in my buddy's 991.2 GT3. The bar put up a good fight. But I won.
The following users liked this post:
tourenwagen (06-07-2021)
#28
Rennlist Member
I'm in the market if anyone happens to be removing one of these mentioned.
#29
Instructor
Join Date: Mar 2009
Location: Beyond the sun.
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
I had BBi customize their bar to add eyelet mounts for the belts for mine. It’s the perfect solution IMO as you can simply unlclip them between track days.
I had a flat top bar on my .1 GT3, and rear view was too impacted for me. Never again...
If CMS bar didn’t have major rear view impact, they would have posted a real rear view picture by now.
#30
Dean of Rennlist, "I'm Listening"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
If you want to be critical of a sponsor, that's fine - but do it with verifiable hard data or personal experience.