Boxster S rotors
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Boxster S rotors
Check out these rotors..!
2+ times the life of the factory cross drilled rotors, better performance.
We have tested them in race conditions for the last 6 months and have outlasted the factory ones and way better performance. We recomend Pagid Black RS-14 pads for track use.
Introductory price of $395 per set for the front.
2+ times the life of the factory cross drilled rotors, better performance.
We have tested them in race conditions for the last 6 months and have outlasted the factory ones and way better performance. We recomend Pagid Black RS-14 pads for track use.
Introductory price of $395 per set for the front.
__________________
2016 GT4-R
Rick DeMan
DeMan Motorsport
Upper Nyack, NY
845 727 3070
Porsche Sales & Service
Porsche Race services and parts
www.DeManMotorsport.com
2016 GT4-R
Rick DeMan
DeMan Motorsport
Upper Nyack, NY
845 727 3070
Porsche Sales & Service
Porsche Race services and parts
www.DeManMotorsport.com
Last edited by Rick DeMan; 11-03-2008 at 01:36 PM.
#2
Porsche Nut
Rennlist Member
Rennlist Member
Check out these rotors..!
2+ times the life of the factory cross drilled rotors, better performance.
We have tested them in race conditions for the last 6 months and have outlasted the factory ones and way better performance. We recomend Pagid Black RS-14 pads for track use.
Introductory price of $395 per set for the front.
2+ times the life of the factory cross drilled rotors, better performance.
We have tested them in race conditions for the last 6 months and have outlasted the factory ones and way better performance. We recomend Pagid Black RS-14 pads for track use.
Introductory price of $395 per set for the front.
#3
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
They are a super high quality cast iron...anodized gold...
#4
Porsche Nut
Rennlist Member
Rennlist Member
The reason I asked is that the OE rotors get a coating of rust when wet and thought maybe these would not rust. I am not that familiar with the anodizing process. Would that wear off and show the original iron after a while? Does the anodizing prevent rust?
#5
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Yes, the anodizing will stop the rust from forming on the parts that are not hit by the brake pads..
The OE Porsche rotors are painted with grey paint in those areas, only the aftermarket rotors have no paint and turn to rust in no time...if your rotors are rusting they are not from PORSCHE...
The OE Porsche rotors are painted with grey paint in those areas, only the aftermarket rotors have no paint and turn to rust in no time...if your rotors are rusting they are not from PORSCHE...