981 OEM rear camera retrofit
#62
Hey guys,
Sorry for super delay replay, but i was unable to get it work..
Still trying... Now i have stuck with piwis coding.. Cant get "rear view camera" selection in PCM screen..
Sorry for super delay replay, but i was unable to get it work..
Still trying... Now i have stuck with piwis coding.. Cant get "rear view camera" selection in PCM screen..
#63
Could the OEM camera work with a standard yellow RCA input like on an aftermarket interface if you cut the factory connector off and put on an RCA? I like the idea of using the OEM camera and license plate light assembly with it integrated.
#64
991/981 PCM 3.1 reverse camera wiring
I am trying to retrofit the OEM reverse camera.
The wiring seams possible to achieve.
but I don't know how the PIWIS coding
do I need a code to active the function?
#65
RL Community Team
Rennlist Member
Rennlist Member
#66
Tank you sir!
I have piwis 2!
I will try next week.
Happy new year!
I have piwis 2!
I will try next week.
Happy new year!
You will need piwis 2 or 3. Scan all modules, select PCM module and clear any faults. Go to coding > manual coding > confirm (f12) > select “reverse camera” or “rear park assist + camera” depending on pcm version. Check the box and confirm (f8). Exit out of piwis, and turn car on and press car button on radio and go to options and you should see backup camera settings.
The following users liked this post:
absoluteczech (01-02-2021)
#68