Offsets for 18" rims
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
What offsets and rim widths are you folks running with 18" rims on your 968's?
Will this fit?
18 x 8.5 ET 50
18 x 10.5 ET 41
Thanks!
David
Will this fit?
18 x 8.5 ET 50
18 x 10.5 ET 41
Thanks!
David
#2
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My SSR GT3 are
18 x 8.5 ET 47
18 x 10 ET 62
My Turbo 3.6 Speedlines are
18 x 8 ET 52
18 x 10 ET 61
Your fronts look OK - your rear are in trouble without a lot of negative camber, fender rolling, high ride height or some combination of such. I did recently bolt a 18 x 10 ET 40 on the rear of my track car just to see how close it was to working. It protruded out from under the fender just a little, but that is with 2.25 negative degrees rear camber. It still wasn't safe in my opinion with how much my car is lowered.
What wheels are you considering?
18 x 8.5 ET 47
18 x 10 ET 62
My Turbo 3.6 Speedlines are
18 x 8 ET 52
18 x 10 ET 61
Your fronts look OK - your rear are in trouble without a lot of negative camber, fender rolling, high ride height or some combination of such. I did recently bolt a 18 x 10 ET 40 on the rear of my track car just to see how close it was to working. It protruded out from under the fender just a little, but that is with 2.25 negative degrees rear camber. It still wasn't safe in my opinion with how much my car is lowered.
What wheels are you considering?
Last edited by chudson; 09-30-2016 at 09:11 AM.
#4
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have a set of 18x8.5 and 18x10 CCW classics that i need to sell. Don't remember the exact offsets off the top of my head, but fronts are in the 50s and rears around 60. Definitely fit in my 968. PM me if interested.