1992 Coupe with 13k miles update and questions:
10-27-2012, 12:12 PM
#16
Team Owner
Join Date: Oct 2009
Location: one thousand, five hundred miles north of Ft. Lauderdale for the summer.
Posts: 28,705
Received 212 Likes
on
153 Posts
i've yet to figure out how to remove my sunroof.
i get to a certain point and it seems like something's going to break.
i get to a certain point and it seems like something's going to break.
Last edited by odurandina; 10-27-2012 at 12:39 PM.
10-27-2012, 02:23 PM
#17
Intermediate
Thread Starter
Join Date: Sep 2008
Location: Denver, CO
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
2nd! I don't have any plans of using it much less removing it. I have not idea how many years it has been since it was last opened and it scares me to try.
10-27-2012, 03:27 PM
#18
OkRider
Rennlist Member
Rennlist Member
I had my sunroof off after it had quit working. One corner would not pull down. At that point I assumed that it was one of the nylon sprockets, so I removed the sunroof. Under close examination I discovered that all the OEM plastic hinges were in various stages of uselessness due to cracks. I replaced all the broken bits with parts that are made of metal. If I remember, I got them from Automotion. May have been Rennline. At any rate, the sunroof works now but I keep it closed anyway. And for what it's worth, my car came with a sunroof bag.
Doug
Doug
10-29-2012, 11:05 AM
#19
Sorry, the link was messed up (fixed now). I can assure you that they are there and you can download them. There are manuals for many other Porsche models there as well (including the 928s).
10-29-2012, 12:52 PM
#20
Shameful Thread Killer
Rennlist Member
Rennlist Member
10-29-2012, 09:27 PM
#22
It took lots of fiddling around with the sunroofs on all 3 of the cars to get them right. The 951 had a bad cable. The. 6-speed not only had broken sliders on the panels, the carriers for the lift arms were broken, and one side would not close all the way.(supposed to be a 9 out of 10 car according to the PO, PorscheG96) The Tip had one corner lifting a little before the other and a broken piece on the panel. But now they work well.
