Head Rebuild - parts?
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2003
Location: Auckland, New Zealand
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Head Rebuild - parts?
I'm looking to refresh/ rebuild the head off my dead motor - should I use factory parts eg valve springs, or are there superior alternatives out there?
#2
Racer
Originally Posted by GeorgeNZ
I'm looking to refresh/ rebuild the head off my dead motor - should I use factory parts eg valve springs, or are there superior alternatives out there?
#3
Rennlist Member
Originally Posted by grants_968
Check out this Heritage Motorcar web page and click on Valvatrain Components.
That's the impression they have given me anyway, a shame as they have some nice looking stuff.
#5
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2003
Location: Auckland, New Zealand
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies - I toyed with the idea of sending it over, but the freight to and from NZ makes it prohibitive. I did like the look titanium valve gear on the 928 developments site but can't seem to get an email response out of them - maybe just as well as the tech's would freak!!
#6
#7
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2003
Location: Auckland, New Zealand
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
More local - but its a damn expensive bit of water between NZ and Aust almost as much as the US. Its sourcing the parts thats the main issue - once we've got the parts, we've got some good head guys.