Lower din pocket with analog clock
08-22-2005, 04:38 AM
#1
Rennlist Member
Thread Starter
Lower din pocket with analog clock
Does anyone know where I can find the lower pocket with analog clock that fits in the lower din of the 968? See picture below
https://rennlist.com/forums/attachme...id=74103&stc=1
https://rennlist.com/forums/attachme...id=74103&stc=1
08-22-2005, 05:44 PM
#3
Those are pretty cheap, around $45 or so from the factory, if I recall correctly. Contact Imagine Auto at 913-310-9927 and ask for Ben, he's gotten a few of them.
In the interests of full disclosure, I have no financial interest in promoting Imagine Auto but I am friends with everyone that works there, so I am not necessarily "objective" in making a recommendation.
Regards,
In the interests of full disclosure, I have no financial interest in promoting Imagine Auto but I am friends with everyone that works there, so I am not necessarily "objective" in making a recommendation.
Regards,
08-23-2005, 10:51 AM
#5
Rennlist Member
Join Date: Oct 2003
Location: Shawsheen River Basin
Posts: 1,697
Received 0 Likes
on
0 Posts
I find using a mechanical pencil works best - the tip of a ball point pen is not deep enough to trigger the connection, but an the lead from a pencil is.
on edit - posted to wrong thread - oops
on edit - posted to wrong thread - oops
Last edited by Shamus; 08-23-2005 at 02:26 PM. Reason: Posted in wrong thread
08-23-2005, 01:37 PM
#6
Three Wheelin'
Join Date: Dec 2004
Location: Lawrenceville, GA
Posts: 1,479
Likes: 0
Received 0 Likes
on
0 Posts
I was under the impression the clocks were very expensive even from resellers new, so I bought a used on on Ebay and it's not really any better than the one I had. A medium sized paper clip bent straight does the job OK, but my plastic was a bit cloudy. The one i purchased on Ebay was just about the same. How about that guy parting out all the 968s? He probaby has one or two to choose from.
