Apex

Please help a poor blind fool

I can't find in the PET anywhere a spec for the three hose clamps top of the throttle body.

(Replacing all hoses and buying new clamps for all... Ha for that matter I can't find a page for those three hoses either... so just curious. I have the complete hose kit from Lindsey, just interesting I can't find 'em in the PET.)

Thanks ​​​​​​​

DSMblue

I did replace those with new clamps sourced through Belmetric. I would have to check tonight to see what the sizes were.

dlearl476

I’ve had good luck sourcing those type of things from CAP Hardware, too.

https://www.caphardwaresupply.com/pr...-7-5mm-wide-w2

bbain

Hi @Apex , in my PET it's page 37.

CLAMPS

• 7 = 999 512 455 00
• 8 = 999 512 351 02
• 13 = 944 110 147 01

HOSES

• 2 = 944 110 308 02
• 16 = 944 110 235 03
• 18 = 944 110 214 06

LM964

Don't need to be OPC sourced. I replaced all mine with stainless clamps. Looks much neater.

DSMblue

Size of clamps is 25.6 for the large, and 18.5 for the two smaller lines (all Oetiker stepless ear clamps).

dlearl476

And are field serviceable, unlike Oetiker clamps that are single use and require a crimping tool.

dlearl476

So 25.6 for #13 and 18.5 for the #7s? #8 is a 70-90mm clamp. I was going to look and measure mine today but I forgot with all the DMV drama. CAP sells those 79-90 in both 7&9mm widths. IIRC, they’re the skinny ones.

I’m guessing #13 is a dealer item with that shock mount stuff, etc. When I became a Wurth dealer I filled up my $500 minimum order with a bunch of nice ABA and Norma hose clamps for the bikes I was selling. Let me check if I have some 18-19mm ones.

DSMblue

No, those sizes are just for the three hoses on the throttle body that are not listed in PET