When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Help with Part Numbers for Belts and Veriocam Pad Part Numbers
I am going to have all four belts on my car replaced, and also replace the Variocam tensioner pads and water pump replaced at the same time. I want to make sure I have all the right part numbers to get before starting the process. If you have knowledge or experience for any of the part numbers highlighted in yellow below, I would appreciate your feedback? In the case of the belts, I am pretty sure I have the right part numbers, but would love some verification to this. In the case of the Variocam Tensioner Pads, I cannot figure out anything from PET, again any help would be very appreciated?
I see you have the PS belt 999-192-236-50 listed. This is a 9.5x950 belt and the one I've always purchased, but for some reason when I had my belts done the last time the shop said this was incorrect and they fitted a 10x950 belt, which seems odd. Anyone have thoughts on that?
10-26-2021, 08:39 PM
Help with Part Numbers for Belts and Veriocam Pad Part Numbers
