Rennlist - Porsche Discussion Forums

Rennlist - Porsche Discussion Forums (https://rennlist.com/forums/)
-   968 Forum (https://rennlist.com/forums/968-forum-71/)
-   -   Who plans to race a 968 in 2018? (https://rennlist.com/forums/968-forum/1039255-who-plans-to-race-a-968-in-2018-a.html)

uscarrera 12-14-2017 03:45 PM

Who plans to race a 968 in 2018?
 
Just wondering how many of us plan to race a 968 in the upcoming year.
List series, class, tracks planning to attend and Car picture.

For me
1994, PCA And HSR, SP3 or E in PCA group 3 Car in HSR, hope to do Sebring, Road Atlanta and VIR.

Rich

https://cimg7.ibsrv.net/gimg/rennlis...974fa74f6.jpeg

1994 968

pmcrespo 12-15-2017 08:36 AM

I have plans to come back in 2018 after a few years without wheel-to-wheel action. Should have #75 ready by the end of the month. Not sure what I'll do about the driver's deep rust though!

1994 #75, PCA, GT5, Sebring (new track for me) or COTA (30% chance), Lime Rock, Watkins Glen, VIR, MMC (new track for me), & NJMP. Wildcards could be Road Atlanta, Road America,& Mid-Ohio as new tracks for me as well.

uscarrera 12-15-2017 08:56 AM

Pablo welcome back I too am returning to a 968 after a bunch of years in other cars if you do Sebring look me up
Rich

pmcrespo 12-15-2017 08:22 PM

Thanks! Will do!

will968 12-16-2017 05:58 PM

I plan to run in SP3 at Lime Rock, Watkins Glen, maybe MMC, and finish with Summit Point if I have anything left.

Pablo, what class will you run in?

pmcrespo 12-17-2017 12:31 PM

Hi Will. GT5 is where I fit. The aero and a few other bits disqualify me from other classes. I normally find myself grossly underpowered and much heavier compared to the 911-based cars in the class, but I make up a little in other areas.

Its going to be a slow process getting back up to speed after not racing in at least three years, and not even being in the car at all in 2017. Its like being a rookie all over again. But I am very much looking forward to it. I have missed it every day...

TheBlau 12-18-2017 10:37 PM

Does autocross count? :icon107:

I'll be doing mostly PCA autocross events here in the northeast with my new-to-me coupe. I've been using my slate grey m030, but wanted a coupe to modify and eventually in 3-4 years when the kids are in school full time and I have more time to commit, plan to add a cage and start doing some HPDE, and hopefully some TT/W2W racing after that. It's a pretty long term plan, but seems useless to do if I could only get out for 1-2 days a year to tracks.
https://cimg7.ibsrv.net/gimg/rennlis...61c058586f.jpg

Slate Grey M030 coupe
https://cimg1.ibsrv.net/gimg/rennlis...d03ee01e9c.jpg

New autocross/track car

Eric_k 12-20-2017 08:33 PM

Does it count if it is just partly 968?

I'll be racing in the Northwest with ICSCC. Depending on circumstances at Pacific Raceways, Ridge Motorsports Park, Portland, ORP, Spokane & Mission BC.

https://rennlist.com/forums/944-turb...-race-car.html


https://cimg6.ibsrv.net/gimg/rennlis...10dc5e2aca.jpg

Cloud9...68 01-02-2018 09:33 PM

No plans for any door-to-door racing, but I'm planning to do many track days at Driveway Austin, which is just three miles from where I work, and 17 miles from home, so I can easily get out there 1-2 times a week. A lot of pretty high dollar hardware frequents that track, so there is plenty of "friendly competition". As far as plans for the car (a track-prepped but still streetable '92 968), the main items are:

- First and foremost, my Aim data acquisition system will hopefully be up and running by this weekend. This will allow me to compare what I'm doing to the pros and instructors at the track, which I'm sure will give me plenty to work on
- A set of 17 x 10.5" BBS E26 wheels (currently running 17 x 9" Twists)
- Working on raising the front and rear roll centers for faster and more stable cornering. Fairly complicated stuff, but fascinating subject matter. Will get an adjustable front sway bar as part of the package.
- Not car related, but I'm planning on installing a lift in my garage soon, and the hardware to do my own alignments and corner balance work


All times are GMT -3. The time now is 08:08 AM.


© 2024 MH Sub I, LLC dba Internet Brands