3.6 ON E-BAY
04-24-2006, 04:04 PM
#17
Rennlist Member
If they can't properly line up the badging how well could they have done on the more "detailed" work? It appears that the seats and the carpet have either been replaced or re-done. What's up with the funky center console?
________________________
94 3.6 Turbo black/black
93 RSA sold (pictured April Pano)
86 911 sold
________________________
94 3.6 Turbo black/black
93 RSA sold (pictured April Pano)
86 911 sold
05-05-2006, 02:10 PM
#20
Three Wheelin'
Join Date: Apr 2006
Location: London, England
Posts: 1,977
Likes: 0
Received 0 Likes
on
0 Posts
Not sure I agree with Roadkill on the seats. The driver's side bolster is well worn.
(My car has 64K and the seats look at least as good.)
Anyway, seems to have sold today. Wonder if the new owner will appear here?
(My car has 64K and the seats look at least as good.)
Anyway, seems to have sold today. Wonder if the new owner will appear here?
05-05-2006, 02:23 PM
#21
Rennlist Member
Originally Posted by DropHit
Does this car appear to have had bodywork? ANd if so how can you tell?
I would only buy this car with a thorough PPI. It appears to have been totally redone. The paint is too clean in the front unless it was covered with 3M all it's life. The rear badge is offset which would make me leary. The thing that concerns me more than anything are the wheels. The wheels on this car can be bought at a premium from Automotion. They are something like $399 each. Why would anyone in their right mind replace $1800 Speedlines with $400 aftermarket wheels unless something caused the speedlines to be scrapped out and repair costs were budgeted.
Yes a PPI is a must.
05-05-2006, 03:37 PM
#22
Race Car
Join Date: Sep 2005
Location: England UK
Posts: 3,508
Likes: 0
Received 0 Likes
on
0 Posts
Yep, I think it has had work, the badge at the back & then at the front the luggage compartment looks like it needs to be moved to one side a little, also looks like the drivers side at the bumper is a little too high too.
05-14-2006, 10:15 PM
#24
7th Gear
Join Date: May 2005
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
OK well she is here, pretty sweet:
1 bar spring
HKS elec boost controller.
Stainless B&B headers with heat
4 wheel coil overs FVD (WHich is a KW suspension 18 way adjustable coil over)
BBS wheels
More to come i am sure as the motor appears to have been worked on etc...
Pretty lucky i guess!
1 bar spring
HKS elec boost controller.
Stainless B&B headers with heat
4 wheel coil overs FVD (WHich is a KW suspension 18 way adjustable coil over)
BBS wheels
More to come i am sure as the motor appears to have been worked on etc...
Pretty lucky i guess!
Last edited by DropHit; 05-15-2006 at 11:12 AM.