Project Turnaround...
Thread Starter
Rennlist Member
Joined: May 2007
Posts: 2,291
Likes: 33
From: Portland, Oregon
Project Turnaround...
I love that stage in an 'extended drydock' where one stops dealing with heavy degreaser, scrubbing and cleaning, and one begins to re-assemble nice shiny, new parts...
Done: Rebuilt all CV joints with new boots and the right grease...
Done: Valve adjustment
Done: Powdercoat engine tin
Done: New oil lines, short hoses, clean and refinish oil tank
To do: fuel and oil filters
To do:reassemble and torque those dang wheel nuts to 350 ft lbs... yowsa!
Done: Rebuilt all CV joints with new boots and the right grease...
Done: Valve adjustment
Done: Powdercoat engine tin
Done: New oil lines, short hoses, clean and refinish oil tank
To do: fuel and oil filters
To do:reassemble and torque those dang wheel nuts to 350 ft lbs... yowsa!
Thread Starter
Rennlist Member
Joined: May 2007
Posts: 2,291
Likes: 33
From: Portland, Oregon
Some of my color choice was due to wanting a high-heat coating in that exact spot. It's where the cat is and the previous paint on that section was entirely cooked off... The only high heat option was that semi flat black.
