Pulled the leads out of the back up lights sensor at the tranny and one of the wires broke at the connector that goes into the sensor. Crap.

Any suggestions short of a new wiring harness?

I guess I could try microsurgery on it and solder it, maybe.

Thought I would ask here first before reinventing the wheel.

Thanks.

 

Should be able to depin it and either solder the broken connections together or pick up new connectors at an electronics supply store, crimp on, and reinstall to the connector

 

Solder it back on. I've had to do both wires on mine (one was precautionary) as they do eventually weaken.