When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Connect the VEMS into stock harness and you will see immediately which sensor is offline.
Good idea but Nick's coming down tomorrow with a trailer and he'll plug it into his Bosch Hammer to see what faults there are.
Originally Posted by PhatPhlatSix
Sounds like airflow meter signal ist kaput...
Yeah I've read a few threads with similar symptoms that were AFM wiring related, there's a TSB infact, why it would go haywire while sat on my drive doing nothing is a puzzle though.
Go to get the airbox off to reach the connector I think - bit rainy today.
Also worth noting that VEMS cannot see if AFM is ok or nok, for obvious reasons. Though if someone really-really wants, it can be set to take load 0-5v signal from the original AFM
Call from Nick this afternoon, good news, just a hose the had popped off apparently meaning the air wasn't gping through the afm. Sounds like they are picking up a car from down this way tomorrow night so might be able drop it back very quickly. Good service!