When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
just had some new pepita inserts made for the pole positions.
What are you guys doing about the metal seat belt receiver stalk with the pole positions? This has probably been covered somewhere but i'm not seeing it... The hard mount, if mounted through the seat hole is a hazard the the right hip on entry. If on the outside, it is going to tear up the center console when the seat it moved. What's the alternative, a soft mount receiver? Thanks in advance.
>50 pounds Seats to Recaro's
>20 pounds lower dash delete
>5 pounds passenger airbag delete
>3 pounds steering wheel to Momo, airbag delete
>20 pounds RS door Cards
8 Pounds rear shelf insulation delete
22 pounds rear seat and seat belt delete
>10 pounds radio and speaker delete
So looks like at least 138 lbs
Those numbers seem a bit high. Also are you subtracting the weight for the replacement parts from the parts they replaced to get total savings? I have a lower dash from a 993 I weighed minus the glove box lid and it only weighed 13 pounds. I guess it is possible that the lid weighs another 7.
You guys put a lot of effort into these interiors which look fantastic. I decided to give myself some projects and will be doing a sunroof delete to my C2 shortly along with some sprucing up of the interior but I prefer to spend on the go fast bits vs the interior. I have never been a fan of the sunroof and losing weight up high is an improvement you can feel.
04-01-2020, 01:01 PM
